1) inverter
[英][in'və:tə] [美][ɪn'vɝtɚ]
逆变
1.
Improvement of the switch frequency and the material-decrease for spot welding inverter power;
提高逆变点焊电源开关频率与节材
2.
Medelling and simulation of resistance spot welding inverter;
电阻焊逆变电源的simulink建模及仿真
3.
MAG/CO_2 inverter welding power with complete remote control;
具有全遥控功能的逆变MAG/CO_2焊机
2) inversion
[英][ɪn'vɜ:ʃn] [美][ɪn'vɝʃən]
逆变
1.
In order to improve the power parameter further,the intermediate frequency inversion of an electric voltage power type series resonance and frequency trace technique are adopted.
为使系统的功率因数较高,采用电压源型负载串联谐振中频逆变器和频率跟踪技术。
2.
A new current control resistance welder with inversion is designed.
设计了一种新型的电流型控制的逆变点焊机。
3.
In addition,the paper introduces the functions of inversion circuit and the working model of controlling and charging.
KA3525是PWM控制器件,利用其输出方波脉冲激励逆变器推挽电路的工作原理,使输出功率器件工作在开关状态,从而达到高效的目的。
3) invert
[英][ɪn'vɜ:t] [美][ɪn'vɝt]
逆变
1.
Design of digital inverter for submerged arc welding;
数字化逆变埋弧焊电源的设计
2.
Parameter design for main circuit of soft switch invert welding power source;
软开关逆变式弧焊电源主回路参数设计
3.
A Review of the Application of Invert Technology to the Resistance Spot Welding;
逆变技术在电阻焊中应用研究
4) inverting
[英][in'və:t] [美][ɪn'vɝt]
逆变
1.
This paper analyses the rationale and the design of the inverting MAG welding machine using the peak current mode control.
分析了峰值电流控制模式的基本原理和设计需要解决的问题 ,研究了峰值电流型控制模式IGBT逆变MAG焊机的一些设计要点 ,包括斜坡电流的检测、波形处理、斜坡补偿、轻载问题的解决和过流保护电路的设
2.
The principle of voltage soft-switch inverting, the method of measuring welding current by magnetic-loop and their advantages are discussed.
介绍了采用ＩＧＢＴ作为开关元件的弧焊逆变器，论述了电压软开关逆变原理、弧焊电流磁环检测方法以及其优点，介绍了电流调节器的应用。
3.
The circuit is fit for the PWM rectifying and inverting situation at which the power should flow in two direction.
该电路特别适合于能量需双向流动的PWM整流和逆变场合。
5) contravariant
[,kɔntrə'væriənt]
逆变
1.
Exporation on New Type Contravariant Technology Used in Minorsignal Amplification;
新型逆变技术实现小信号放大的探索
2.
The paper briefly explains the contravariant principle and the effect of the return of afterflow,suggests the method of rendering the return of afterflow.
简要地说明逆变原理及续流回路的作用,提出了绘制续流回路的方法。
6) inverter welding machine
逆变焊机
1.
MSP430F155's application in remote control current of inverter welding machine;
MSP430F155单片机在逆变焊机电流遥控中的应用
2.
Investigation of application of TMS320 serials DSP in inverter welding machine;
TMS320系列DSP在逆变焊机中的应用研究
3.
Full-bridge IGBT for inverter welding machine;
用于逆变焊机的全桥IGBT
补充资料：逆变
1.变乱。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条