1) Short fiber
短纤维
1.
The influence of short fiber on the mechanical properties of SF/polymer composites;
短纤维对复合材料力学性能的影响
2.
Compression fatigue heat-build up property of natural rubber/solution styrene-butadiene rubber blends reinforced by short fiber;
短纤维增强天然橡胶/溶聚丁苯橡胶共混物的压缩疲劳生热性能
3.
Development and application of short fiber - rubber composite material;
短纤维-橡胶复合材料的开发及应用
2) staple fiber
短纤维
1.
Analysis of measures to reduce unit melt consumption for PET staple fiber;
降低涤纶短纤维熔体单耗的措施分析
2.
Research of friction property for dry spinning polyacrylonitrile staple fiber;
干法纺聚丙烯腈短纤维摩擦性能的研究
3.
Study on manufacturing PES staple fibers;
加工聚酯(PES)短纤维的研究
3) short fibre
短纤维
1.
Structure and properties of new aramid pulp short fibre/CR composite;
新型芳纶浆粕短纤维补强CR复合材料结构与性能的研究
2.
Study on properties of short fibre/CR composite;
短纤维/CR复合材料的性能研究
3.
New pretreatment method of nylon short fibre and its effect on properties of SFRC;
锦纶短纤维的新预处理方法及其对SFRC性能的影响
4) staple
[英]['steɪpl] [美]['stepḷ]
短纤维
1.
Production technology discussion on PTT staple industrialization;
PTT短纤维工业化生产工艺探讨
2.
The cause and countermeasures of polyester staple defect;
涤纶短纤维疵点产生的原因及对策
5) short fibers
短纤维
1.
Al_2O_(3f)+C_1/ZL109 short fibers reinforced hybrid metal matrix composites can be fabricated by squeeze casting,a new type vibration generator used in vibration drilling system is introduce,which is composed of permanent magnets,can produce compound vibration,and the low frequency vibration experiment was done.
用挤压铸造法制备了三氧化二铝短纤维和碳短纤维混杂增强 ZL109合金复合材料,并采用永磁复合激振方式进行了轴向与扭转复合振动钻削加工,研究了该材料的钻削加工性及振幅和振动频率对钻削力、钻头磨损和孔精度的影响。
2.
The failure mechanism and mechanical property of a brittle composite matrix,reinforced with short fibers under the uniaxial tensile load,have been studied.
研究短纤维增强脆性基复合材料在单轴拉伸荷载下的力学性能和破裂机理。
3.
During solidification, α-Al phase nucleates first in the interstices between the short fibers and grows gradually toward the surface of Al2O3 short fibers.
结果表明:Al2O3纤维与基体间润湿良好,生成了致密的界面层;在凝固过程中,α-Al相在短纤维间隙中形核并向纤维表面生长,纤维表面Cu和La元素的浓度增大,纤维间隙中的Cu元素的浓度减小。
6) blended various length staple fibers
长短纤维
1.
In this paper,technology of blended various length staple fibers processing together was studied,60Nm ramie/vinylon/polyester/cotton fibers blended yarn was formed on the roving frame by mixing the cotton/polyester short fibers slivers and ramie/vinylon long fibers slivers together.
通过对长短纤维纺纱的工艺路线及关键工序的生产技术进行研究和创新,在苎麻粗纱机上将涤/棉短纤维条与麻/维长纤维条进行复合,纺出60Nm麻/维/涤/棉长短纤维复合纱。
补充资料：短纤维
分子式：
CAS号：
性质：又称切段纤维。化学纤维长纤维束被切断或拉断成相当于各种天然纤维长度的纤维。也可用天然纤维如晶须及石棉。短纤维界限，长度一般为35～150mm。按天然纤维的规格可分为棉型，毛型，地毯型和中长型等短纤维。它们可以纯纺，也可和不同比例的天然纤维或其他纤维混纺制成纱条，织物和毡。例如，将通用级沥青碳纤维切成150mm长，直径为15μm，强度为800GPa，模量41GPa的碳纤维，与酚醛系碳纤维(长度70mm，强度200MPa，直径14μm)以8:2的比例混合，制得稳定均整的纱条。编织成各种形状的织物或短切成纤维用于复合材料如水泥、铝合金的增强体。
CAS号：
性质：又称切段纤维。化学纤维长纤维束被切断或拉断成相当于各种天然纤维长度的纤维。也可用天然纤维如晶须及石棉。短纤维界限，长度一般为35～150mm。按天然纤维的规格可分为棉型，毛型，地毯型和中长型等短纤维。它们可以纯纺，也可和不同比例的天然纤维或其他纤维混纺制成纱条，织物和毡。例如，将通用级沥青碳纤维切成150mm长，直径为15μm，强度为800GPa，模量41GPa的碳纤维，与酚醛系碳纤维(长度70mm，强度200MPa，直径14μm)以8:2的比例混合，制得稳定均整的纱条。编织成各种形状的织物或短切成纤维用于复合材料如水泥、铝合金的增强体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条