1) flow regulating internal
整流构件
1.
The velocity vector and flow field inside the separator with two different inlet internals, four different flow regulating internals and six different coalescing internals are obtained, and the separation features of different internals are analyzed and compared.
应用Fluent软件的标准κ-ε模型和多相混合模型,对重力式分离器的油水分离内流场进行了三维数值模拟,得到含有2种不同入口构件、4种不同整流构件和6种不同聚结构件的分离器内部速度矢量和流场,分析并比较了不同构件的分离特性。
2) integral component
整体构件
1.
Combined with the geometrical simulation of machining process based on UG dynamical mounting technology and simulation of shaping law based on MATLAB finite element analysis,the computer simulation of NC-Electrochemical machining process for the complex curves and cavities of integral components is realized.
将基于UG平台动态装配技术的加工过程几何仿真与基于MATLAB平台有限元分析的成形规律仿真有机结合,实现了整体构件上复杂曲面、型腔数控电解加工过程的计算机仿真,用于加工试验前的加工过程干涉检查、阴极及其运动轨迹优化设计、优选加工参数及成形精度分析等,能有效缩短准备周期、减少试验次数。
3) rectifying component
整流组件
1.
4500kW brushless exciter is the device which supplies the direct current for 1000MW level turbine genera- tor,among the manufacturing technology of 4 500kW brushless exciter,the diode rectifying is very important part,assuring the good contact between the rectifying components and rectifier wheel is also very important .
在4500kW无刷励磁机制造工艺中,二极管整流部分是其中的重要部分,而保证整流组件与整流盘如何良好接触非常重要。
4) rectification component
整流元件
1.
Development of high-power rectification component performance testing system;
大功率整流元件性能测试系统的研制
5) rectification mechanism
整流机构
6) Monolithic component
整体结构件
1.
Finite element model of milling process sequence forframe monolithic components;
框类整体结构件铣削加工顺序的有限元模型
2.
Three-point press straightening analysis of aircraft monolithic component based on its rebound curve
基于回弹曲线的航空整体结构件三点压弯校正分析
3.
Machining deformation of aircraft monolithic component is simulated by finite element method (FEM) and validated by experiment.
在模拟淬火、拉伸过程获得含有初始残余应力的预拉伸板材以及模拟单齿切削过程获得切削载荷的基础上,提出并采用接力算法,对一航空整体结构件的材料铣削过程进行有限元仿真,同时进行了试验研究。
补充资料：整流电弧
分子式：
CAS号：
性质：在发射光谱激发光源的低压交流电弧回路中，接入整流电路，则为整流电弧。由小功率高压火花回路组成的引燃线路引燃。电流为单方向，脉冲放电。可用金属或合金试样作为阳极进行定量测定。
CAS号：
性质：在发射光谱激发光源的低压交流电弧回路中，接入整流电路，则为整流电弧。由小功率高压火花回路组成的引燃线路引燃。电流为单方向，脉冲放电。可用金属或合金试样作为阳极进行定量测定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条