1) torsion fatigue limit
扭转疲劳极限
1.
The rotary bending fatigue limit and torsion fatigue limit stress is analyzed using the stress field method.
应用应力场强法对旋弯疲劳和扭转疲劳极限进行了分析,并通过3种金属材料的旋转弯曲和扭转疲劳试验加以验证,结果表明,旋转弯曲疲劳极限和扭转疲劳极限之间的关系同解析表达式给出之间的吻合得非常好,因此得到结论,应力场强法能够比较好的描述两种疲劳强度极限之间的关系。
2) torsional fatigue
扭转疲劳
1.
A Study on repeated torsional fatigue property of wool fibres;
羊毛纤维重复扭转疲劳性能的研究
2.
Through physical and chemical experiments, it is obtained that the break of the cam shaft is a torsional fatigue break.
通过理化试验,得出凸轮轴断口属扭转疲劳断口。
3) torsion fatigue
扭转疲劳
1.
Refining Process and Heat Treatment on Torsion Fatigue Property of Steel 50CrVA;
精炼和热处理工艺对50CrVA扭转疲劳性能的影响
2.
The torsion fatigue test was conducted on para-aromatic fiber and ultrahigh-molecular weight polyethylene ( UH-WPE) by using self-developed torsion fatigue apparatus.
在自制的扭转疲劳装置上,进行对位芳纶和超高相对分子质量聚乙烯(UHMWPE)纤维扭转疲劳实验,分析扭转机理及其扭转疲劳断口形貌特征。
3.
In this work,fracture behavior of a new martensitic steel 25CrNi3MoV under different loads has been investigated by using notch tension tests,impact tests,rotating bending fatigue tests and torsion fatigue tests and the results have been compared wit.
本论文通过缺口拉伸和冲击试验以及旋转弯曲和扭转疲劳试验,研究新型轴用马氏体钢25CrNi3MoV在不同载荷下的断裂行为及常用轴用马氏体钢18Cr2Ni4W和34CrNiMo的疲劳断裂行为。
4) fatigue limit
疲劳极限
1.
Influence of surface integrality on fatigue limit for 30CrMnSiNi2A steel;
表面完整性对30CrMnSiNi2A钢疲劳极限的影响
2.
Quantitative study on influence of chemical heat treatment on apparent fatigue limit of 40Cr steel;
化学热处理对40Cr钢表象疲劳极限影响的定量化研究
3.
Acquisition system unit about the infrared image of fatigue limit of metal based on USB2.0;
金属疲劳极限快速检测的USB2.0数据采集单元设计
5) torsional endurance limit
抗扭疲劳限
6) pure torsional fatigue
纯扭转疲劳
补充资料：扭转痉挛
扭转痉挛
torsion spasm
又称“变形性肌张力不全”。由基底节病变所引起，以躯干和四肢的不随意扭转动作并伴有肌张力障碍为特征的一种综合征。分原发性和继发性两类。前者为原因不明的变性病，与遗传有关；后者可继发于感染、中毒、血管病等。表现为颈部、躯干和四肢近端肌肉呈间隙性的螺旋样扭转动作。扭转时肌张力增高，扭转停止后肌张力恢复。扭转可随病情进展成为持续性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条