1) Processing Map
热加工图
1.
The processing map and activation energy map of the alloy were established by using tested data,and mi- crostructure evolution of deformed samples was also examined.
利用实验数据建立了合金的热加工图和热激活能图,对变形过程中组织演化进行了研究。
2.
One reason why the forging of FGH96(Chinese PM Nibased Superalloy) superalloy is often unsatisfactory is the lack of its processing maps.
5的能量耗散图,根据稳定性判据得到非稳定区,将两者叠加,就构成FGH96的热加工图。
3.
Microstructure observations suggested that the processing map could be characterized by four domains:dynamic recrystallization domain at 450—500℃and about 0.
利用动态材料模型构建了热加工图,结合组织观察结果认为,该合金在450—500℃、应变速率约为0。
2) heating pattern
加热图形
3) adding working drawing
附加加工图
4) manuscript
[英]['mænjuskrɪpt] [美]['mænjə'skrɪpt]
原图;加工图
5) processing maps
加工图
1.
Hot deformation and processing maps of 2618 aluminum alloy;
2618铝合金的热变形和加工图
2.
The microstructure of deformed specimens was observed and the processing maps were calculated and analyzed.
并观察了变形后的显微组织,计算分析了该合金的加工图。
3.
The processing maps were calculated and analyzed according to the dynamic material model.
根据材料的动力学模型,建立了热加工图,不同真应变下的热加工图相似,随着变形温度的升高及应变速率的降低,能量消耗效率η逐渐升高。
6) graph and table processing
图表加工
1.
Firstly, the article reviewed rule model, cognitive process model, and computational model; secondly, it commented the hierarchical framework model which had been put forward in 2004; and finally, it summarized the graph and table processing theories and pointed out research directions in the future.
图表加工是指人们对图表所呈现信息的认知加工。
补充资料：热加工
| 热加工 hot processing of metal 在高于再结晶温度的条件下，使金属材料同时产生塑性变形和再结晶的加工方法。热加工通常包括铸造、锻造和金属热处理等工艺，有时也将焊接、热切割、热喷涂等工艺包括在内。热加工中金属的变形抗力小，塑性大，不会产生加工硬化现象，可以进行大量的加工变形。热加工能使金属零件在成形的同时改善其组织，或者使已成形的零件改变结晶状态以改善其机械性能。对于铅、锌、锡等低熔点的金属材料，由于其再结晶温度低，即使在室温下对其进行塑性加工也属于热加工。热加工主要适用于加工截面尺寸大，变形量较大的金属制品及半成品，以及那些硬脆性较大的金属材料。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条