说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 涡耗散燃烧模型
1)  eddy-dissipation combustion model
涡耗散燃烧模型
1.
Unsteady turbulence model and eddy-dissipation combustion model based on turbulence chemistry interaction was used,three dimension distribution of non-premixed combustion fire in an apartment unit was simulated numerically.
采用非稳态湍流模型和湍流与化学反应相互作用的涡耗散燃烧模型,对套室内扩散燃烧的火灾进行了三维空间数值模拟。
2)  eddy dissipation concept model
涡耗散概念模型
1.
With the help of Fluent software two-phase reacting flow module, the 3D numerical simulation was performed by using eddy dissipation concept model.
基于Fluent两相反应流场计算平台,采用涡耗散概念模型,对典型亚燃冲压发动机燃烧室的两相反应流场进行三维数值模拟计算。
3)  Eddy-Dissipation Model
漩涡耗散模型
1.
The gas phase was expressed with k-ε two-equation model;the combustion was described with Eddy-Dissipation Model;the oil drop motion was described with Discrete Phase Model;the radiation was expressed with Discrete Ordinates Radiation Model.
所采用的模型为 k-ε模型、漩涡耗散模型、离散相模型和离散坐标系辐射模型。
4)  non-premixed combustion model
扩散燃烧模型
1.
A fire simulation of long tunnel under different fire loads and ventilation velocities was carried out by using the non-premixed combustion model which considered turbulence effect and radiation.
采用考虑了湍流效应和辐射传热的扩散燃烧模型,对长隧道在不同规模火源和通风条件下的火灾过程进行了数值模拟。
2.
A temperature field simulation of arch crown in long tunnel fires,under different fire loads and ventilation velocity,was carried out,employing non-premixed combustion model which considered turbulence effect and radiation.
采用考虑了湍流效应和辐射传热的扩散燃烧模型,对某长隧道在不同火灾规模和通风条件下的拱顶温度场进行模拟。
5)  eddy-dissipation-concept (EDC) model
涡耗散概念(EDC)模型
6)  dissipative model
耗散模型
1.
To understand the properties of the transfer function of parallel tube-manifold system in wind tunnel test,an analysis is made of several parameters related to the transfer function on the basis of the dissipative model with some qualitative rules on perallel tube-manifold system obtained.
为了掌握风洞实验中多通道测压管路系统的特性,基于耗散模型,分析了影响系统频率响应函数的各个参数,总结了多通道管路系统频响函数的定性规律,并指出在常用的几何尺寸范围内,影响频响函数的因素主要有PVC管的长度、内径和限制器的尺寸及位置,为设计多通道测压管路系统提供了依据。
2.
According to the characteristics of the weapon system pressure signal, the dissipative model is selected as the theoretical model in this paper.
本文推导了圆形管道传输的三种理论模型,比较了三种理论模型的优缺点,并根据武器系统压力信号的特点,选用了耗散模型作为传压管道动态特性的理论模型。
补充资料:耗散
1.损减散失;消散。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条