说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 环氧丙烯酸单酯
1)  epoxy monoacrylate
环氧丙烯酸单酯
1.
A dual-curing epoxy monoacrylate resin was synthesized,which contain both epoxide groups and unsaturated double bonds.
合成了既有环氧基团又含不饱和双键的环氧丙烯酸单酯树脂。
2)  epoxy acrylate resin
环氧丙烯酸酯
1.
Preparation and characterization of waterborne modified-epoxy acrylate resin;
水性环氧丙烯酸酯的制备与表征
2.
Preparation of polyurethane modified epoxy acrylate resin grouting material;
聚氨酯改性环氧丙烯酸酯灌浆材料的制备
3.
A flexible epoxy acrylate resin prepolymer was prepared.
通过对环氧树脂进行改性,增加其韧性,再用丙烯酸酯化,制得柔性环氧丙烯酸酯预聚体。
3)  Epoxy acrylate
环氧丙烯酸酯
1.
Study on synthesis and UV coating film properties of epoxy acrylate modified with maleic anhydride and polyethylene glycol monoester;
马来酸聚乙二醇单酯对环氧丙烯酸酯的改性及其紫外光固化膜性能的研究
2.
Properties of epoxy acrylate synthesized from epoxy resin by modification and esterification;
有机二元酸改性环氧丙烯酸酯及其光固化膜性能的研究
3.
Using FTIR to monitor UV-curing process of epoxy acrylate adhesive;
用FTIR跟踪监测环氧丙烯酸酯胶粘剂光固化过程的研究
4)  epoxy-acrylate
环氧-丙烯酸酯
1.
Synthesis and study of low-VOC water-borne epoxy-acrylate hybrid latex;
低VOC水性环氧-丙烯酸酯杂化乳液的合成与研究
2.
A hybrid emulsion polymerization technique was used to synthesize water-based epoxy-acrylate hybrid emulsion.
利用杂化乳液聚合技术合成了水性环氧-丙烯酸酯杂化乳液,考察了乳化剂种类和用量对乳液单体转化率、凝聚率和电解质稳定性的影响,通过FT-IR、GPC、UV对所得乳液进行了分析与表征。
3.
A reactive anionic polyurethane-Acrylate has been prepared, which is then used as emulsifier to prepare the UV curable waterborne epoxy-acrylate/polyurethane-acrylate coatings.
制备了可反应性的阴离子型聚氨酯-丙烯酸酯,并用其作为乳化剂制成了可紫外光固化的水性环氧-丙烯酸酯/聚氨酯-丙烯酸酯复合型水性涂料。
5)  vinyl ester
环氧丙烯酸酯
1.
The heat resistant solventless insulating impregnating varnish, which mainly comprises of diallyl isophthalate (DAIP ) and vinyl ester (VE), was synthesized and tested.
合成了以间苯二甲酸二烯丙酯 (DAIP)为主体、环氧丙烯酸酯 (VE)为改性剂的耐高温无溶剂绝缘浸渍漆 ,用 DTA分析了漆液的反应特性 ,讨论了 DAIP的预聚、VE含量等因素对漆液、浇铸体性能的影响 ,并对漆的常规性能进行了测试。
6)  TMA epoxyacrylate
TMA环氧丙烯酸酯
1.
A turpentine as a main material can react with an epichlorohydrin and an acrylic acid to form a new TMA epoxyacrylate resin.
以松节油为主要原料与顺酐、环氧氯丙烷及丙烯酸反应 ,合成一种新型TMA环氧丙烯酸酯。
补充资料:癸氧喹酯
分子式:C24H35NO5
分子量:417.53
CAS号:18507-89-6

性质:浅黄色结晶性粉末。熔点86-87℃。微溶于氯仿、乙醚,几乎不溶于水。无臭。

制备方法:由3,4-二羟基硝基苯在DMF介质中与溴癸烷反应生成3-羟基-4-癸氧基硝基苯。然后经乙氧基化、还原,制得3-乙氧基-4-癸氧基苯胺。然后,3-乙氧基-4-癸氧基苯胺与乙氧基亚甲基丙二酸二乙酯缩合,得3-乙氧基-4-癸氧基苯胺基甲叉丙二酸二乙酯,最后经导热姆A加热缩合而得成品。

用途:喹啉类球虫药。作为饲料添加剂,预防肉鸡球虫病,1t饲料加本品27.2g。该品毒性低,耐受性好,安全范围大。代谢迅速,停药3天后,各组织中残留药物浓度低于1ppm。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条