说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 酸压
1)  acid fracturing
酸压
1.
Pressure decline curve analysis for acid fracturing in carbonate rock fractured reservoirs;
碳酸盐岩裂缝性油藏酸压压降曲线分析
2.
Application of filtration control and deep-penetrating variable-viscosity acid fracturing technologies;
滤失控制与变粘酸深穿透酸压工艺技术的应用
3.
Laboratory experiment on acid fracturing technology with viscous acid
稠化酸酸压技术室内实验研究
2)  acid-fracturing
酸压
1.
Evaluation of acid-fracturing technology in fracture oil reservoir of Lunnan buried hill;
轮南潜山裂缝性油藏酸压工艺评价
2.
Fracture height extension mechanism and fracture height control acid-fracturing technology;
裂缝高度延伸机理及控缝高酸压技术研究
3.
Study and application of acid-fracturing for increasing injection in Duanliubo low permeability oilfield;
段六拨低渗透油田酸压增注技术研究与应用
3)  Acid Fracture
酸压
1.
The Mixed Nitrogens Acid Fracture Technology in Reservoir Bed of Deep-fractured Carbonate Rock;
深层裂缝性碳酸盐岩储层混氮酸压技术
2.
The effect of acid fracture on the carbonate rock layer is expatiated upon in the article, and the difficulty in our acid fracture work in TAHE oil field is analyzed.
依据影响碳酸盐岩储层酸压效果因素,并对塔河油田深井碳酸盐岩储层酸压技术难点进行了分析,提出了三种适合于塔河油田深井碳酸盐岩储层深度酸压改造的工作液体系即:胶凝酸、乳化酸、活性酸及其配套酸压工艺技术,并对四种深度酸压工艺及其特点做了简要介绍。
4)  acidizing (acid fracturing)
酸化(酸压)
5)  acid fracturing with variable viscosity
变粘酸酸压
6)  acid fracturing
酸化压裂
1.
A 3-D analytical model and interpretation method of pressure decline for acid fracturing well;
酸化压裂井停泵压力三维分析模型和解释方法
2.
Pilot test of blasting-acid fracturing complex technology in gas wells of western Sichuan;
燃爆诱导酸化压裂在川西气井中的先导试验
3.
This paper first analyzes the difficulties,and then provides some suggestions,for example,taking some technologies of acidization and acid fracturing as basis,introducing a new type acid system which is representative by both gel and .
针对这些困难,提出了以酸化和酸化压裂技术为基础、引入胶凝酸和乳化酸为代表的新型酸液体系、辅以前置液酸压及多级注人等工艺技术、视储层类型和井部位及完井方式不同而选择不同酸化工艺组合的应对措施及建议。
补充资料:冲击波超压与动压

[解释]:  核爆炸产生的高温、高压火球膨胀,在周围介质中形成连续向外传播的压力脉冲(或冲击波),冲击波阵面传播到空间某点时,超过周围环境大器的压力称超压;空气粒子高速随波阵面运动产生的冲击压力称动压。超压和动压都以帕斯卡(Pa)为主单位。超压随时间的变化取决于爆炸威力、距爆点的距离和爆心周围的介质情况。特定地点的峰值超压一般出现在冲击波阵面到达该点的瞬间,超压在该点的持续时间称为正压作用时间。尔后,该点的压力下降到低于周围压力,称为负压,再逐渐回升到周围压力值。对人员的直接冲击伤,超压为20—29千帕可引器轻度伤;29—59千帕可导致中度伤;59—98千帕可造成重度伤;大于98千帕可造成极重度伤。动压为10—20千帕可造成中度伤;20—39千帕可造成重度伤;大于39千帕可造成极重度伤。动压的推动、抛掷和超压的挤压会造成物体变形和毁坏。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条