说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 稀土催化型聚合氯化硫酸铁(RE-PFSC)
1)  rare earth nitrates catalyst
稀土催化型聚合氯化硫酸铁(RE-PFSC)
2)  Chlorization-Polymirized Ferric Sulfate
氯化聚合硫酸铁
3)  polyferric chloride sulfate
聚合氯化硫酸铁
1.
Preparation of polyferric chloride sulfate
聚合氯化硫酸铁制备方法
4)  Polymerization by rare earth catalysts
稀土催化聚合
5)  compound polymerized ferric sulfate chloride
复合聚合氯化硫酸铁
1.
Using the waste liquid from sulfuric acid picking , waste iron chips , waste hydrochloric acid and ferrous sulfate as raw materials, by potassium chlorate oxidation, using waste hydrochloric acid to adjust the acidity of the reaction system, the compound polymerized ferric sulfate chloride which has good performance on flocculation was synthesized under certain working condition.
以硫酸酸洗废液、废铁屑、废盐酸和硫酸亚铁为原料,在一定的条件下,经过氯酸钾的氧化和废盐酸的酸度调节,得到絮凝性能优良的复合聚合氯化硫酸铁。
6)  polymeric aluminum-ferric chloride sulfate(PAFCS)
聚合氯化硫酸铁铝
1.
NaClO3 oxidation method was adopted to prepare polymeric aluminum-ferric chloride sulfate(PAFCS) coagulant by using pyrite cinder,whose particle size was around 200 μm as the raw material and using sulfuric acid and hydrochloric acid as the leaching liquid.
采用氯酸钠氧化法以200μm左右粒度的硫铁矿烧渣为原料,硫酸和盐酸作浸取液,制备聚合氯化硫酸铁铝(PAFCS)絮凝剂,通过正交试验优化了最佳工艺条件:浸取温度为120℃,浸取时间为1。
补充资料:RE number
分子式:
分子量:
CAS号:

性质:指油品在规定条件下进行乳化和分离时,分出油品所需的时间(以秒表示)。用以表示蒸汽乳化试验中,油品(特别是透平油)从乳状液中分离出来的能力。时间越短,抗乳化性能越好。如果油品中含有硫化物、氯化物或乙醇等时,就会妨碍油与水的分离,并增大油品的抗乳化值。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条