1)  gel-combustion method
					
	
					
				
				
	
					
				凝胶-燃烧法
				1.
					04 blue phosphor materials were prepared by gel-combustion method.
					
					
						
						
					
						采用凝胶-燃烧法合成了Sr2MgSi2O7:Eu02。
					2.
					04(La,Ce,Nd,Sm,Gd,Tb,Dy,Ho,Er,Tm) are prepared by gel-combustion method.
					
					
						
						
					
						采用凝胶-燃烧法合成了系列稀土掺杂的Sr2MgSi2O7:Eu20。
					3.
					9O4 have been synthesized by gel-combustion method.
					
					
						
						
					
						用凝胶-燃烧法合成锂离子正极材料LiAl0。
					
					2)  gel combustion
					
	
					
				
				
	
					
				凝胶燃烧法
				1.
					Nd:GGG precursor was synthesized via gel combustion method from a mixed solution of Ga2O3 and Gd2O3.
						
						以Ga2O3和Gd2O3为原料,并用一定量的Nd取代Gd,采用柠檬酸作为燃烧剂,凝胶燃烧法合成了Nd:GGG前驱体。
					
					3)  sol-gel combustion method
					
	
					
				
				
	
					
				溶胶凝胶燃烧法
			
					4)  sol-gel combustion method
					
	
					
				
				
	
					
				溶胶-凝胶燃烧法
				1.
					The influential factors of precursor for preparation of SmBO3 powder by sol-gel combustion method were investigated.
						
						研究了溶胶-凝胶燃烧法制备SmBO3前驱体过程中的各种影响因素,考察了煅烧温度及煅烧时间对所合成的SmBO3粉体光吸收性能的影响。
					2.
					Nd3+ doped gadolinium lanthanum oxide transparent laser ceramic powder is prepared by the complex co-precipitation method and sol-gel combustion method.
						
						分别用络合共沉淀法和溶胶-凝胶燃烧法制备了掺钕氧化钆镧粉体,用热分析仪(TG-DTA)、X射线粉末衍射仪(XRD)、扫描电子显微镜(SEM)和傅立叶变换红外光谱仪(FTIR)对制备的粉体进行了分析。
					
					5)  Sol-gel combustion method
					
	
					
				
				
	
					
				溶胶-凝胶-燃烧法
				1.
					Study on spectrum of MgO-Al_2O_3:Ce~(3+),Tb~(3+) synthesized by Sol-gel combustion method;
						
						溶胶-凝胶-燃烧法制备MgO-Al_2O_3:Ce~(3+)、Tb~(3+)及其光谱行为的研究
					
					6)  sol–gel combustion method
					
	
					
				
				
	
					
				溶胶–凝胶燃烧法
				1.
					The sol–gel combustion method was used to synthesize 50%Er3+ (in mole) doped Y3Al5O12(YAG) nanopowder, using er-bium oxide, yttria, aluminum nitrate and citric acid as starting materials.
						
						以氧化铒、氧化钇、硝酸铝及柠檬酸作为起始原料,采用溶胶–凝胶燃烧法制备 50%Er3+(摩尔分数)掺杂的 Y3Al5O12(YAG)纳米粉体。
					2.
					Nd3+/Yb3+-co-doped YAG transparent ceramic nano-powders were prepared by sol–gel combustion method, and their structure, morphology and properties were also analyzed by thermogravimetric–differential thermal analysis, X-ray diffraction, trans- mission electron microscopy, infrared spectrum, absorption and fluorescence spectra.
						
						采用溶胶–凝胶燃烧法,制备了钕镱共掺钇铝石榴石(Nd3+/Yb3+:YAG)透明陶瓷纳米粉体,并用热分析、X射线衍射、红外光谱、透射电镜、吸收及荧光光谱等测试方法对其结构、形貌及性能进行分析。
					补充资料:Sds-聚丙烯酰胺凝胶电泳凝胶电泳
		sds-聚丙烯酰胺凝胶电泳(sds-page,sodium dodecyl sulfate-polyacrylamide gel electrohoresis)
在有去污剂十二烷基硫酸钠存在下的聚丙烯酰胺凝胶电泳。sds-page只是按照分子大小分离的,而不是根据分子所带的电荷和大小分离的。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条