1) building machine
成型机
1.
Discuss the technical property of VAST4 building machine and MMTR3 building machine;
浅析VAST4型与MMTR3成型机的技术性能(上)
2.
Design and research of carcass trans. ring for radial tire building machine.;
子午胎成型机胎体传递环的设计和研究
3.
Brief introduction to the structure and maintenance of VAST4 building machine;
VAST4成型机结构与维护简介
2) forming machine
成型机
1.
Design of pneumate system for forming machine of molding concrete tile;
模压水泥瓦成型机气压传动系统设计
2.
The double radius hole type was commonly adopted for the forming machine of straight weld pipe with vertical roller in domestic present.
目前，国内带有立辊组的直缝焊管成型机大都采用双半径孔型。
3.
Based on the demands of the techniques of the forming machine of molding concrete tile, the author advances the design rgquirement of the hydraulic system and the pneumatic system and describes the principle and the character of the hydraulic system and the pneumatic system in detail, which is of great value to designs of other forming machines.
针对模压水泥瓦成型机工艺要求 ,提出了成型机的液压和气动系统设计要求 ,设计了成型机的液压和气动系统。
3) molding machine
成型机
1.
3D CAD Design of the Straw Core Molding Machine;
秸杆芯成型机的三维CAD设计
2.
Developing and Designing of the ZB-4 Concrete Straw-core Brickwork Molding Machine;
ZB-4混凝土草芯砌块成型机的设计与开发
3.
The working state and existing problems of the paper receiving system of KDF-2 molding machine are analyzed,and the paper receiving mechanism and control system with the application of modern mechanical design theory and PLC control technology are reconstructed.
对某厂使用的KDF-2成型机的接纸系统的工作状态和存在的问题进行了分析,应用现代机械设计理论和PLC控制技术对现有的接纸系统进行结构和控制系统的改造,把机械无级变速箱传动改为由三个伺服电机独立驱动并采用PLC控制,把盘纸降速拼接改为高速拼接,从而有效地解决了更换盘纸带来的滤棒吸阻、重量在降速时波动大,影响设备使用效能等问题,改造后使滤棒吸阻,重量更容易控制,提升了设备性能。
4) shaping machine
成型机
1.
Avenue to mprove the roductivity of hydrautic shaping machine for honeycombed coal;
提高液压式蜂窝煤成型机生产率的途径
2.
Quick design of shaping machine based on SOLIDWORKS and 3DMAX;
基于SOLIDWORKS和3DMAX的成型机快速设计
3.
By the research of shaping mechanism of biomass and shaping factors,the paper summarizes a better technological condition for extrusion-shaping of rice hull and designs a kind of shaping machine.
通过对生物质成型机理及影响成型因素研究,总结出一种较好的稻壳挤压成型的工艺条件,并设计了一种成型机,即在高温高压作用下,使稻壳产生较大的物理、化学变化,并通过螺杆挤压成型,成为一种相对高密度的燃料。
5) Shaper
[英]['ʃeipə] [美]['ʃepɚ]
成型机
1.
Study on the force and energy parameters of the stopping clay shaper;
炮泥成型机力能参数的研究
2.
Noise assessment and noise control of the shaper of building blocks;
建筑砌块成型机噪声评价与治理
3.
This paper introduces the cement cavity brick shaper and the production procedure,and discuss the successful implementation by using PLC on system control.
文章介绍了水泥空芯砖成型机的结构与工艺流程,并成功地用PLC实现系统控制。
6) PM5 molding machine
PM5成型机
1.
Early warning research about the length of mouth stick of PM5 molding machine;
PM5成型机的嘴棒长短预警研究
补充资料：J17SA塑料注射成型机
J17SA塑料注射成型机
…誉洲一‘粉一院\·、研。供、…
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条