1) cleaning liquid
清洗液
1.
The purifying treatment of cleaning liquids in the course of industrial production is a critical process to guarantee the assembly quality.
工业生产中 ,清洗液的净化处理是保证产品质量的重要环节 ,它是资源循环利用的重要环保课题。
2.
A new cleaning technique for curing mold is studied and a series of products of tiremold ultrasonic cleaning unit and cleaning liquid are developed by a special design and ultrasonic field experiments.
以超声波理论和橡胶配方技术为基础，研究了超声波在声场介质中的衰减系数，解决了超声波对硫化胶垢（粘弹性体）比一般污物高出２０００倍左右损耗率的问题，通过对超声场的特殊设计和对清洗液的科学实验，探讨和实践新一代的橡胶硫化模具清洗技术，对改变现代硫化模具的清洗方式具有变革性的意义。
3.
Throught practical experience that application of ultrasonic cleaning to continous production line of steel wire to clean metal oxide and residual stearic acid, disposal and reclaim of rinsing water and maintenance and regeneration of cleaning liquid are set forth.
介绍超声波清洗的原理及其优点,通过在钢丝连续生产线中使用超声波技术清洗钢丝表面的金属氧化物、残留硬脂酸的实践经验,阐述生产过程中漂洗水的处理、回收及清洗液的维护再生方法。
2) cleaning solution
清洗液
1.
This paper researches the regeneration of electrokinetic cleaning solution contained Cu and Ni by virtue of 732 cationic resins,and the results show that the effect of upward exchange excels downward exchange; however,the effect of flow velocity was not obvious;removal rates of Cu and Ni reach about 97%～100%under the condition of 1～5mL/min flow velocity.
利用732型阳离子树脂对含Cu、Ni的电动清洗液进行再生研究,结果表明,上行式交换效果明显优于下行式的交换效果,但流速对交换效果的影响不明显,流速为1～5 mL/min,对Cu、Ni的去除率都在97%～100%;考虑树脂性能,清洗液体积与树脂体积最佳比应为12:1;以50 mL浓度为5%的HCl对树脂进行再生,上行式明显优于下行式的洗脱效果,流速与洗脱率成反比关系,流速为0。
3) cleaning fluid
清洗液
1.
Cooperating with FN cleaning fluid,which dilutes dispersed cement slurry,this equipment can avoid trip in drifting cleaning bell mouth operation after liner setting,therefore ensures the smooth operation of electric logging and oil production.
该装置与稀释分散水泥浆的ＦＮ清洗液配合使用，能避免尾管固井碰压后下钻通井清洗喇叭口作业，从而保证电测和采油等后续作业的顺利进行。
2.
Therefore,clean out system as well as cleaning fluid has been developed in indoor experiment,which could not only clean out th.
因此,室内研制了油基钻井液井筒清洗装置,并开发出针对性的清洗液,该清洗液不仅能对套管内壁上的油膜产生较强的渗透清洗力,并且能防止洗掉的油污造成二次污染,具有较理想的清洗效果,清洗率达90%以上,有效的保护了储层。
4) washing fluid
清洗液
1.
To solve the bad bonding interface between well cementing and the filter cake of oil-based darilling fluild,Wetting-transition agent——TSBN and a washing fluid which can change the interface wettability were studied.
针对油基泥浆钻井在套管和井壁所形成的泥饼与固井水泥浆之间的胶结质量不好的现象,本实验室研制出了高效润湿性调节剂-TSBN,调配出了能较好改变油、水两个界面间润湿性的高效清洗剂;并从改变油水界面润湿性能力、清洗液流变性、胶结面质量三个方面对清洗液的评价方法做了初步的探讨。
5) cleaning agent
清洗液
1.
Objective Using a suitable cleaning agent in cleaning the probe so that it can avoid the false high results and establish the instrume nt s cleaning program and background test for quality control of blood viscosity .
目的 选择适用的清洗液清洁旋转式血液粘度计测头 ,防止假性粘度高值 ;建立仪器清洗程序和本底实验 ,是为血粘度质控的基础实验。
6) rinsing liquid
冲洗［清洗］液
补充资料：精子清洗液
精子清洗液
精子清洗液为处理精液双清洗时用，为生长液加链霉素。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条