1) PTFE porous metal
PTFE多孔金属
1.
PTFE glass cloth, its derivative products and PTFE porous metal, preparation thesis and method process are reviewed, respectively.
叙述了PTFE玻璃布及其衍生产品和PTFE多孔金属的性能和用途,制备原理、方法和工艺。
2) porous PTFE
多孔PTFE
1.
Nafion/SiO_2/PTFE composite membrane was prepared with Nafion/SiO_2 solution and porous PTFE film as raw materials.
采用Nafion/SiO2溶液和多孔PTFE薄膜为原料,制备了Nafion/SiO2/PTFE复合膜。
2.
By negative corona charging with a grid, measurements of isothermal surface potential decay, thermally stimulated discharge current spectra (TSD), charge TSD, and measurements of piezoelectric d33 coefficient by dielectric resonance spectroscopy, the electret properties of the double layer hybrid films composed of porous PTFE and spin coated P(VDF-HFP) film are first studied.
通过栅控恒压负电晕充电、等温表面电位衰减测量、热刺激放电(Thermally Stimulated Discharge,TSD)电流谱分析、电荷TSD和压电D33系数测量等方法,首次研究了将旋涂在基片上的含一定溶剂的聚偏氟乙烯和六氟丙烯共聚物(P(VDF-HFP))薄膜与多孔聚四氟乙烯薄膜均匀压合形成的多孔PTFE/P(VDF-HFP)双层复合膜系的驻极体性质。
3) porous metal
多孔金属
1.
Electromagnetic wave absorption properties of aluminum foams-based porous metal composite;
泡沫铝基多孔金属复合材料吸波性能
2.
Preparation of Lotus-type Porous Metal with Metal-gas Eutectic Directional Solidification;
金属-气体共晶定向凝固制备藕状多孔金属的研究
3.
Structure design and material choice of porous metallic substrate supporter;
多孔金属基载体材料的选择与结构设计
4) porous metals
多孔金属
1.
Prospect of Making Artificial Bones with Uni directional Solidification Porous Metals;
定向凝固多孔金属制造人工骨的前景展望
2.
The research progress in biomedical porous metals has been reviewed concerning their production, mechanical properties, corrosion resistance and biocompatibility.
本文综述了生物医用多孔金属材料在制备工艺、力学性能、耐蚀性及生物相容性方面的研究进展。
3.
The structure and its control of the porous aluminum prepared by a special pressure infiltration process was studied ,for which a model for calculating the porosity of porous metals was developed.
利用自行研制的填料粒子，采用独特的渗流法制备了多孔金属铝，提出了填料颗粒为球形时多孔金属孔隙率的计算模型，实验证明用此模型预测多孔金属的孔隙率是可行的。
6) porous Mg metal
多孔镁金属
补充资料：PTFE corrugate tube
分子式：
CAS号：
性质：是用特殊的吹胀成型制成。是将聚四氟乙烯管材在一定模具中加热到一定温度，管内给予一定的内压，使管材横向扩大(吹胀)然后冷却定型而制得。此波纹管具有聚四氟乙烯的固有性能，还具有高的挠曲性和弹性。根据波纹形状有V型、U型和Ω型三种。作为耐腐蚀管道的连接件，起着吸收因热胀冷缩所引起的管道长度的变化，有连接刚性大而易脆管道的错位连接作用。为了提高使用性能，波纹管还可用金属环、金属套、橡胶等增强。
CAS号：
性质：是用特殊的吹胀成型制成。是将聚四氟乙烯管材在一定模具中加热到一定温度，管内给予一定的内压，使管材横向扩大(吹胀)然后冷却定型而制得。此波纹管具有聚四氟乙烯的固有性能，还具有高的挠曲性和弹性。根据波纹形状有V型、U型和Ω型三种。作为耐腐蚀管道的连接件，起着吸收因热胀冷缩所引起的管道长度的变化，有连接刚性大而易脆管道的错位连接作用。为了提高使用性能，波纹管还可用金属环、金属套、橡胶等增强。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条