2) continuous casting process
连铸工艺
1.
The best continuous casting process parameters for GCr15 are found out through contrast test,the inner quality of casting billet and rolled steels obviously improved.
通过对GCr15连铸工艺参数的对比试验,找到了最佳的连铸工艺参数,明显提高了铸坯及其轧材的内部质量。
3) casting technology
连铸工艺
1.
Recently,it has been proven that the casting technology is advanced because the slab grinding ratio of grade 304 is on the same level at the reference plant.
针对不锈钢冶金特性和最终用途特点设计了板坯连铸工艺装备和工艺参数,在热调试和生产过程中不断调整连铸工艺,目的在于改善板坯表面质量。
4) continuous casting
连铸工艺
1.
In this paper, continuous casting process for high-speed locomotive brake beam steel have been introduced, factors affecting the quality of rectangle bloom was also discussed.
本文介绍了首钢高速机车制动梁用钢的连铸工艺过程;阐述了各种因素对连铸坯质量的影响及提高铸坯质量的相关措施;此外,进行了铸坯质量分析及用户使用情况介绍。
5) casting process
连铸工艺
1.
Recently,it has been proven that the casting process design is successful because the slab grinding ratio of steel grade 304 has got the same level of the reference plant.
宝钢不锈钢分公司根据不锈钢的特点设计了板坯连铸工艺装备和工艺参数。
2.
The analysis of 430 stainless steel slab micro-structure was carried out to modify the casting process.
对此,通过对430钢种板坯组织形态的分析,提出连铸工艺的改进,减少上述缺陷的产生。
6) heated-mold continuous casting
热型连铸
1.
Cu-Sn alloy wires were prepared by the "heated-mold continuous casting+cold deformation+ recrystalliza- tion annealing + cold deformation" technics.
通过"热型连铸法+冷拔+再结晶退火+冷拔"工艺制备的Cu-0。
2.
The contrast of heated-mold continuous casting of copper rod experiments on two different structural molds were carried out.
用两种结构铸型进行了热型连铸铜杆对比试验研究,结果表明,提高铸型温度梯度有利于稳定固液界面的位置,从而扩大热型连铸工艺参数配合的范围。
3.
By approprizte process parameters,the Al-1%Si alloy wire with good surface quality and unidirectional dendritic crystal was fabricated on the self-made horizontal heated-mold continuous casting equipment.
在自制的水平热型连铸设备上,采用一定的工艺参数,制备出了表面呈镜面,内部组织沿轴向定向排列的柱状晶Al-1%Si线材,其与金属型生产的多晶线材相比,屈服强度提高40%,伸长率提高35。
补充资料：播艺
1.播种耕作。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条