1) axial gas-oil multiphase pump
轴流式油气混输泵
1.
Study on the flow field in inhalation chamber and the stage of the axial gas-oil multiphase pump;
轴流式油气混输泵吸入室及压缩级流场分析
2) Gas-oil multiphase pump
油气混输泵
1.
By using simulation-analysis software CFD(Computational Fluid Dynamics),STAR-CD,a three-dimensional simulation analysis was conducted of the semi-volute suction chamber of a gas-oil multiphase pump for flow fields at different void fractions.
利用CFD模拟分析软件———STAR-CD,对油气混输泵半螺旋形吸入室在不同含气率下的流场进行了三维模拟分析。
3) Oil-Gas Multiphase Pump
油气混输泵
1.
Design of the Inlets of Gas-Liquid Mixers of Oil-Gas Multiphase Pumps;
油气混输泵进口气液混合器的设计
2.
In this paper,based on the impeller of oil-gas multiphase pump YQH-100,by changing vane number the optimized design was conducted,and the flow field was simulated using software Fluent.
本文在原YQH-100型油气混输泵的叶轮基础上,改变叶片数优化叶轮,并在F luent中对流场进行模拟,结果证明:叶片数为4时,动叶轮性能较佳,为以后设计提供有益的参考。
4) oil-gas pump
油气混输泵
1.
Optimal design on aerofoil parameter of impeller is made based on the second YQH-100 oil-gas pump.
基于第二代YQH-100油气混输泵叶轮的基本参数,对叶轮的翼型参数进行了优化设计。
2.
As the principal of gathering and transferring of oil-gas,oil-gas pump has the effect of reducing back pressure、increasing output of oil-gas、cost of construction budget and operation reduction、simplification production control.
应用油气混输泵作为油气集输的核心部件具有降低井口回压、增加油气产量、降低工程投资及运行费用、方便生产管理等优点。
5) Mixed-flow bittern transfer pump
混流式输卤泵
6) diesel engine driven mixed-flow pump
混流式柴油机泵
补充资料：混流泵标准汇总
标准编号 | 标准中文名称 | 标准英文名称 |
GB/T13008-1991 | 混流泵、轴流泵技术条件 | Technical specifications for mixed and axial flow pumps |
GB/T13006-1991 | 离心泵、混流泵和轴流泵汽蚀余量 | NPSH for centrifugal, mixed flow and axial pumps |
GB/T13469-1992 | 工业用离心泵、混流泵、轴流泵与旋涡泵系统经济运行 | Economical operation for industrial centrifugal, mixed flow, axial flow and vortex pump systems |
GB/T18149-2000 | 离心泵、混流泵和轴流泵水力性能试验规范精密级 | Centrifugal,mixed flow and axial pumps--Code for hydraulic performance tests--Precision class |
JB/T6433-1992 | 大、中型立式混流泵 型式与基本参数 | |
JB/T5413-1991(2005复审) | 混流泵、轴流泵开式叶片 验收技术条件 | |
JB/T53307-1999 | 混流泵、轴流泵 产品质量分等 | |
JB/T51185-1999 | 蜗壳式混流泵 产品质量分等 | |
JB/T51232-1999 | 导叶式混流泵 产品质量分等 | |
NF E44-165-1990 | 工业泵.离心泵、混流泵和轴流泵.允许的机械振动级 | (Industrial pumps. Centrifugal, mixed flow and axial pumps. Allowable level for mechanical vibrations.) |
NF E44-146-1988 | 旋转泵.法兰力和力矩.垂直轴离心泵.混流泵和轴流泵 | (ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. VERTICAL SHAFT CENTRIFUGAL,MIXED FLOW AND AXIAL PUMPS.) |
EN ISO 5198-1998 | 离心泵、混流泵和轴流泵 液压性能试验规范 精密级 | Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987) |
JB/T6667.1-2004 | 蜗壳式混流泵 第1部分：型式与基本参数 | |
JB/T6666.1-2004 | 导叶式混流泵 第1部分：型式与基本参数 | |
JB/T6666.2-2004 | 导叶式混流泵 第2部分：技术条件 | |
JB/T6667.2-2004 | 蜗壳式混流泵 第2部分：技术条件 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条