1) EPR
二元乙丙橡胶
1.
Easily-open infusion bottle cover material was prepared with PP as a basic material and EPR as additive by melting crossblending method.
以聚丙烯(PP)为基材,加入一定量的低密度聚乙烯(LDPE)和增塑剂邻苯二甲酸二辛酯(DOP)通过与二元乙丙橡胶(EPR)熔融共混制备了易开启式输液瓶外盖用料。
2.
PP was taking as basic material,and blended with ethylene propylene rubber(EPR)by means of melt blending to prepare easy openable infusion bottle-cover materials,in which a certain amount of LDPE and plasticizer was added to improve the compatibility and mechanical properties of the blend.
以聚丙烯(PP)为基材,与二元乙丙橡胶(EPR)用熔融共混的方法,制备易开启式输液瓶外盖用料,并加入一定量的低密度聚乙烯(LDPE)和增塑剂以改善体系相容性和力学性能,讨论了增塑剂邻苯二甲酸二辛酯(DOP)、乙酰柠檬酸三正丁酯(ATBC)及丙三醇对共混体系力学性能的影响。
3.
Functionalized EPDM and EPR were prepared with glycidyl methacrylate(GMA), maleic anhydride(MAH) and acrylic acid (AA) as the grafting monomers and 2,5-dimethyl-2,5-di-(t-butylperoxyhexane) as the initiator.
用２，５－二甲基－２，５－二叔丁基过氧基己烷为引发剂，甲基丙烯酸环氧丙酯（ＧＭＡ）、马来酸酐（ＭＡＨ）和丙烯酸（ＡＡ）为接枝单体，对三元乙丙橡胶（ＥＰＤＭ）和二元乙丙橡胶（ＥＰＲ）进行熔融接枝，接枝产物用ＦＴＩＲ、１３Ｃ－ＮＭＲ等进行了表征，并用化学滴定方法对接枝率进行了测定。
2) ethylene-propylene copolymer
二元乙丙橡胶
1.
The role of styrene in isocyanate functionalization of ethylene-propylene copolymer;
苯乙烯在异氰酸酯官能化二元乙丙橡胶中的作用
2.
Ethylene-propylene copolymer(EPM) is functionalized with isocyanate-bearing unsaturated monomer,1-methyl-1-[3-isopropenyl]benzyl ethyl isocyanate(TMI)and comonomer styrene,using 2,5-dimethyl-2,5-di(tert-butylperoxy)-hexane(DHBP) as free-radical initiator in Haake torque rheometer.
在哈克流变仪中,研究了苯乙烯(St)存在下1-甲基-1-[3-异丙烯基]苯基乙异氰酸酯(TMI)官能化二元乙丙橡胶(EPM)的过程,讨论了2,5-二甲基-2,5-双(叔丁基过氧基)己烷(DHBP)用量、St用量、TMI用量、反应时间、反应温度、螺杆转速对接枝反应的影响。
3) silane grafting EPM
硅烷接枝二元乙丙橡胶
1.
The EPDM/MVQ was modified by using the silane grafting EPM (EPM g S) as the compatibilizer and the modification mechanism was discussed.
探讨了硅烷接枝二元乙丙橡胶 (EPM g S)作相容剂对EPDM/甲基乙烯基硅橡胶 (MVQ)共混物的改性及改性机理。
4) EPDM
三元乙丙橡胶
1.
Research Headway of EPDM Blend System;
三元乙丙橡胶共混改性的研究进展
2.
Preparation,structure,properties and application prospect of EPDM/clay nanocomposites;
三元乙丙橡胶/蒙脱土纳米复合材料的制备、结构、性能与应用前景
3.
Preparation of an Adhesive for Bonding EPDM;
三元乙丙橡胶粘接用胶黏剂的研制
5) ethylene-propylene-diene rubber
三元乙丙橡胶
1.
Forward extrusion simulation and invert die design of ethylene-propylene-diene rubber in simple dies;
三元乙丙橡胶在简单口型中的正向挤出分析及逆向口型设计
2.
Mixing processing properties of chloroprene rubber/ethylene-propylene-diene rubber blends;
氯丁橡胶/三元乙丙橡胶共混胶的混炼工艺性能
3.
Effect of modified carbon black on mechanical properties and processability of ethylene-propylene-diene rubber;
改性炭黑增强三元乙丙橡胶的力学性能与加工性能
6) ethylene propylene diene monomer
三元乙丙橡胶
1.
Morphology and properties of ultra-fine full-vulcanized styrene butadienerubber powder/ethylene propylene diene monomer blends;
超细全硫化粉末丁苯橡胶/三元乙丙橡胶共混物的结构与性能
2.
Morphological structure of dynamically vulcanized thermoplastic elastomer of ethylene propylene diene monomer/polypropylene;
三元乙丙橡胶/聚丙烯动态硫化热塑性弹性体的相态结构
3.
Properties of intumescent flame retardant ethylene propylene diene monomer/polypropylene thermoplastic vulcanizate;
膨胀阻燃三元乙丙橡胶/聚丙烯热塑性硫化胶的性能
补充资料：二元乙丙橡胶
分子式：
分子量：
CAS号：
性质：见乙丙橡胶。
分子量：
CAS号：
性质：见乙丙橡胶。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条