1) viscosity loss
黏度损失
1.
Analysis of the viscosity loss of polymer solution in the process of injection allocation;
配注过程中聚合物溶液的黏度损失分析
2.
5% gaseous N2 were injected alternatively and dramatically viscosity losses were observed for the solution reaching to well head while severe corrosion appeared in polymer transporting pipelines.
5%的氮气,井口黏度损失十分严重,现场检查发现注聚管道内壁腐蚀严重。
2) strength loss
强度损失
1.
Variance of analysis results by Statistical Analysis System(SAS)showed that the effect of fungi species and exposure periods on the weight loss and strength loss of wood decay was significant(at 0.
05水平);而且,腐朽木材失重率与力学强度损失率之间的相关性也非常显著,说明本研究中设计的木材加速腐朽试验方法具有可行性。
2.
Many properties of fresh and hardened concrete with AEA-1 such as workability,bleeding rate,strength loss and freeze resistance etc.
介绍一种新型引气剂(简称AEA-1)的性能,并且通过与目前应用较为广泛的三萜皂甙类引气剂(简称AEA-2)对比研究了其引气混凝土的性能,如:新拌混凝土的和易性、泌水率、强度损失和抗冻性能等。
3.
In the making process of circular saw,the diamond strength loss in the sintering is greater than that of in the welding.
根据热压烧结理论 ,通过实验 ,系统分析研究了一定工艺条件下 ,金刚石受温度影响强度损失的情况 ,得出烧结温度对金刚石强度的影响大于焊接温度对金刚石强度的影响 ,为工具制造中合理选用金刚石的强度提供参
3) accuracy loss
精度损失
1.
Design of accuracy loss experiment system;
精度损失实验系统装置的设计
2.
Research on the theory of the accuracy loss equality of dynamic measurement system
动态测量系统的精度损失均匀理论的研究
3.
By applying neural network method to error separation,accuracy loss function of every element can be first obtained according to that of the total system.
首先根据动态系统总精度损失规律,采用神经网络误差分解方法,得到各组成单元的精度损失函数。
4) precision loss
精度损失
1.
Experimental system of precision loss in dynamic measuring;
动态测量精度损失实验系统
5) temperature loss
温度损失
6) viscosity loss
粘度损失
1.
On the basis of the data obtained the origin of viscosity loss in injection pi.
聚合物溶液盛于内径 6cm、长 30cm、由不同材料制成的管子内 ,在不同条件下处理 1h和 3h ,测定溶液在实验温度下的粘度 (7s-1)和溶液中Fe3 + 浓度 ,根据测试结果讨论了造成注聚管道中聚合物溶液粘度损失的因素。
2.
The reasons of viscosity loss (VL) are investigated and following results are obtai.
探讨了引起粘度损失的原因 ,结果如下。
补充资料：杯球黏度计
分子式：
CAS号：
性质：一种测定黏稠性液体黏度的仪器。将一定直径的钢球置于盛有一定温度被测液体的容器底部，将具有一定形状与尺寸的杯子慢慢压黏到球上，使钢球与液体进入杯中，将杯垂直提起，测定从提取球至球脱离杯落下所需的时间(t)，计算液体黏度η=kt。式中Κ为仪器常数。
CAS号：
性质：一种测定黏稠性液体黏度的仪器。将一定直径的钢球置于盛有一定温度被测液体的容器底部，将具有一定形状与尺寸的杯子慢慢压黏到球上，使钢球与液体进入杯中，将杯垂直提起，测定从提取球至球脱离杯落下所需的时间(t)，计算液体黏度η=kt。式中Κ为仪器常数。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条