1) organic salt
有机盐
1.
Effects of complex organic salt on the preserrastion fresh pork;
复合有机盐溶液对猪肉保鲜效果的研究
2.
Stimulated emission properties of an organic salt-doped polymer film in microcavity
有机盐掺杂聚合物微腔的受激发射特性研究
3.
The solid-free organic salt solution is applied to based-phase for work fluids because of their adjustable density, low viscosity, and strong inhibition and so on.
由于有机盐无固相水溶液密度可调范围大、溶液粘度低、抑制性强等特点,得以作为油气井工作液的基液在钻井、完井、试油等作业中推广应用。
2) organic acid salt
有机酸盐
1.
This may be due to generation of organic acid salt in the simulation experiment.
对柴达木盆地西部第三系烃源岩进行了生烃动力学模拟实验,使用氯仿对产物抽提,结果表明抽提物的生成量不符合经典的生烃动力学规律,无法采用动力学方程模型进行分析,这可能是由于模拟实验中产生了有机酸盐的缘故。
2.
The main reduction reaction mechanism of CHi which was decomposed from organic acid salt(calcium magnesium acetate CMA)with NO was discussed.
对天然气再燃过程中添加的有机酸盐同时脱硫、脱氮反应途径及机理进行了详细的分析。
3.
Physical chemistry character of organic acid salt as accelerator in the situation of pulverized coal reburning have been analyzed, and found that CMA was a suitable accelerator.
本文对超细煤粉再燃情况下作为促进剂的有机酸盐的物理化学特性进行了分析,发现钙镁醋酸盐(CMA)是一种适用于再燃情况下的促进剂。
3) organic molten salts
有机熔盐
1.
Research progress on aluminium electrodeposition in organic molten salts;
有机熔盐电镀铝的研究进展
2.
Electrodeposition of aluminum and aluminum alloy coatings onto Q235 steel from AlCl3-BPC and AlCl3-MEIC organic molten salts were carried out.
采用AlCl_3-BPC及AlCl_3-MEIC有机熔盐体系在Q235基体上进行了电镀铝及铝合金的实验,并就不同电镀工艺对铝镀层的厚度、结构、表面形貌、结合力和耐蚀性等的影响进行了研究。
4) organic sodium salt
有机钠盐
1.
A bentonite ore from Jinxi,Jiangxi province was modified by organic sodium salt(sodium dodecyl benzene sulfonate),and the effecting factors including salt dosage,modifying time,pulp concentration, modification temperature were discussed.
以有机钠盐(十二烷基苯磺酸钠)作为改性剂,对江西金溪钙基膨润土进行钠化改性,探讨了有机钠盐用量、钠化时间、浆浓度、钠化温度对钠化效果的影响。
5) organic lead-salt
有机铅盐
1.
Specially for the processing of PVC plastics,XDW high-efficiency multifunction organic lead-salt compound stabilizer is prepared by reasonable formula and special process.
以氰尿酸替代无机酸合成有机铅盐,选择具有协同作用的辅助热稳定剂和多种功能性助剂,通过合理配方和特殊工艺制成PVC塑料加工专用XDW高效多功能有机铅盐复合稳定剂。
6) organic alkoxide
有机醇盐
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条