1) bulging deformation
鼓胀变形
1.
Bulging Deformation Analysis and Safety Assessment of Coking Tower;
焦炭塔鼓胀变形分析与安全评定
2.
The skirt from bottom to top of the tower was changed,and a nip convention out ektexine of coke tower was added to change the accepting force with coke tower in order to avoid the bulging deformation and cold crack with welding line below the coke tower.
将炼油行业传统焦炭塔的下裙座支撑改为上裙座支撑,在焦炭塔外壁增加一夹套,改变了焦炭塔的受力,避免了塔体下部鼓胀变形和焊缝冷裂纹的产生。
3.
In slashing running conditions,the bulging deformation of coke drums may appear after some years.
在苛刻的作业工况下,焦炭塔运行若干年后会出现筒体鼓胀变形。
2) drum deformation
鼓胀变形
1.
There ′re many factors that influence the result of compression test for cast iron, among which the internal friction of material and the drum deformation of sample are most important.
影响铸铁压缩试验结果的因素很多 ,其中最主要的是材料内摩擦力及试件的鼓胀变形。
2.
After many years run, the drum deformation and cucurbit deformation appear.
一个生产周期为48小时，使焦炭塔经历了循环的升温、降温，整个塔体在室温与480℃之间循环变化，致使焦炭塔在运行若干年后出现塔体鼓胀变形和葫芦状变形。
3) lateral swelling deformation
侧向鼓胀变形
4) Bulging up bottom board to be out of shape
底鼓变形
5) bulging
[英][bʌldʒ] [美][bʌldʒ]
鼓肚变形
1.
The influences of mold wear on the formation of bulging and internal cracks in the continuous casting billets were investigated by the finite element coupled mathematical model of solidification and stress.
应用连铸坯凝固传热与应力分析耦合数学模型，定量地描述了坯壳与结晶器壁间气隙的大小和分布，着重研究了结晶器 磨损对坯壳鼓肚变形和内裂纹形成的影响。
2.
Based on the viscoelastic plate model, rheology theory and elastic thin plate theory, the bulging deformation and stress in continuous cast slabs were analyzed and calculated.
以粘弹性薄板为模型，应用材料流变学理论及弹性薄板理论，分析计算了连铸板坯在钢水静压力与不均匀温度场作用下所发生的鼓肚变形与应力。
6) drum deformation
鼓形变位
1.
Distribution of active earth pressure against flexible retaining walls with drum deformation;
鼓形变位模式下柔性挡土墙的主动土压力分布
补充资料：鼓胀胀
1.形容膨胀的样子。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条