1) ceramic coated anilox roll
陶瓷涂层网纹辊
2) envirnmental knurled roll
陶瓷网纹辊
3) ceramic coatings
陶瓷涂层
1.
Study on SHS reactive flame sprayed multiphase ceramic coatings;
自蔓延反应火焰喷涂复相陶瓷涂层研究
2.
Formation mechanism for Al_2O_3 based ceramic coatings on aluminum alloy substrates;
铝合金基体上Al_2O_3基陶瓷涂层形成机理
3.
Study on ceramic coatings by flexible-cord spraying;
软线喷涂陶瓷涂层的研究
4) ceramic coating
陶瓷涂层
1.
Present status on the research of ceramic coatings on magnesium alloys;
镁合金陶瓷涂层研究现状
2.
Study on preparation and wear resistance of nano- Al_2O_3 ceramic coatings on magnesium alloy;
镁合金表面纳米Al_2O_3陶瓷涂层的制备及耐磨性研究
3.
Preparation and corrosion resistance of electrophoretically-deposited Al_2O_3 ceramic coating;
电泳沉积氧化铝陶瓷涂层的制备及耐腐蚀性能
5) ceramic coat
陶瓷涂层
1.
The development of the ceramic coat plug valve core which substrate uses 45 steel is introduced.
该陶瓷涂层的组织细小,晶粒生长较完善,具有结合强度高、表面形态好、残余应力低的特点。
2.
From the mechanism of the ceramic coat of plasma spray,analyzing and measuring the metallic phase of the coating,coating thickness and uniform,density,porosity,bond strength,degree of hardness,agreeability and degree of roughness,at the same time,it gives good reference on repairing invalidation die.
根据等离子喷涂陶瓷涂层机理,对涂层的金相组织、厚度、密度、孔隙度以及涂层的结合强度、硬度、耐磨性和涂层表面粗糙度等性能进行测定和分析,阐述模具表面等离子喷涂陶瓷涂层性能的检测与分析技术,为模具修复提供技术保证。
6) ZrC ceramic coating
ZrC陶瓷涂层
1.
Study on the intensity process and the performance of the ZrC ceramic coating with electrical discharge in the liquid;
液中脉冲放电沉积ZrC陶瓷涂层的强化工艺及涂层性能的研究
补充资料：门辊涂布
分子式：
CAS号：
性质：纸的双面辊式涂布，因涂布装置有一对大直径的涂布门辊而得名。涂布机的主体由6根辊子组成，纸幅夹在两门辊间同速运转。两面涂布时通过给料辊和计量辊间间隙和上述两辊与门辊间的速差来控制涂布量。门辊涂布能适应高浓涂料，也可两面用不同涂料涂布。可与造纸组合成机内涂布，也可单独在造纸机外涂布。
CAS号：
性质：纸的双面辊式涂布，因涂布装置有一对大直径的涂布门辊而得名。涂布机的主体由6根辊子组成，纸幅夹在两门辊间同速运转。两面涂布时通过给料辊和计量辊间间隙和上述两辊与门辊间的速差来控制涂布量。门辊涂布能适应高浓涂料，也可两面用不同涂料涂布。可与造纸组合成机内涂布，也可单独在造纸机外涂布。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条