1) Homogeneous welding rods
同质焊丝
2) TC18 filler metal
同质焊材
1.
The mechanical properties and microstructure of the joints joined by the new developed filler metal and TC18 filler metal were compared,the results showed that only the strength of the joint joined by TC18 filler metal was satisfied,while the comprehensive mechanical properties of the joint joined by the developed filler wire were ideal.
对采用研制的焊丝和采用TC18同质焊材钨极氩弧焊焊接TC18钛合金的接头力学性能及微观组织进行了对比研究,结果表明:采用同质焊材焊接TC18钛合金只能保证接头的强度指标,而采用研制的新型焊丝焊接TC18钛合金,可以保证接头具有优良的综合力学性能。
3) homogeneous weld
同质焊缝
1.
A homogeneous weld electrode was developed for welding spheroidal graphite cast iron.
采用该焊条对球墨铸铁焊接时 ,可以达到同质焊缝要求。
4) homogeneous electrode
同质焊条
1.
By the procedure of spraying the Ni-matrix alloy transition layer on the surface of casting defect and using multi-alloying cast iron homogeneous electrode with high welding current and continuous welding technique, obtained the homogeneous welding zone in which there is no chill structure and crack.
通过在铸件缺陷表面喷敷镍基合金过渡层 ,采用多元微合金化铸铁同质焊条大电流连续焊工艺 ,可获得无白口和裂纹的铸铁同质焊补区。
2.
The effects of Al element and welding temperature on the structure of welding zone obtained by Ca Ni Ti Bi multi alloying cast iron homogeneous electrode for arc cold welding were studied under producing condition.
在生产条件下 ,研究了铝粉的加入量及焊接温度对多元微合金化铸铁电弧冷焊同质焊条所获得的焊补区组织和性能的影响 ,观察评估了焊条的焊接工艺性能。
5) Micro-alloyed castiron gas welding wire
微合金化铸铁同质气焊丝
6) wire
[英]['waɪə(r)] [美]['waɪr]
焊丝
1.
An automatic wire winding machine controlled by a single chip microcomputer system is introduced in this article.
介绍了一种采用单片机控制的自动焊丝层绕机。
2.
The progress of flux and wire developed in China for oil and gas pipeline during The Eighth-Five Years Plan is introduced.
介绍了“八五”以来,我国研制的油气管道用埋弧焊丝、焊剂的进展情况;探讨了我国X80以上钢级管道焊接材料研制的思路;总结了其研制阶段和成分设计思想;分析了现有焊接材料的调整空间和高性能焊接材料的发展趋势。
补充资料：反类质同晶
分子式：
CAS号：
性质： 当两种物质的晶体结构和几何性质都相同，而相应原子或离子对换了位置时，就称为反类质同晶现象。
CAS号：
性质： 当两种物质的晶体结构和几何性质都相同，而相应原子或离子对换了位置时，就称为反类质同晶现象。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条