1) Ti-17 Alloy
Ti-17合金
1.
Study of Discontinuous Yielding and Flow Softening in High Temperature Deformation of Ti-17 Alloy;
Ti-17合金高温变形中的不连续屈服与流变软化研究
3) Ti-17 powder alloy
Ti-17粉末合金
1.
Ti-17 powder alloy was prepared by the method of sintering + isothermal forging,and the densities and transformation of microstructure in the process of preparing powder alloy were investigated.
采用烧结+等温锻造的方法制备Ti-17粉末合金,对粉末合金制备过程中各工序的密度、显微组织变化规律等进行了试验研究。
4) Sm_2Fe_(17)alloy
Sm_2Fe_(17)合金
1.
Microstrutural evolution and cryomilling mechanism of the Sm_2Fe_(17)alloy powders were studied by means of XRD,SEM,HRTEM and XPS,etc.
采用SEM、HRTEM、XRD以及XPS等方法对Sm_2Fe_(17)合金在液氮球磨过程中的微观组织演变过程及球磨机制进行了研究。
5) Ti Alloy
Ti合金
1.
Preparation and Research of Medical Ti Alloy Surface Biology Glass Coating;
医用Ti合金表面生物玻璃涂层的制备与研究
2.
Effect of collagen and heat treatment on the properties of HA coating on Ti alloy;
胶原和热处理对Ti合金表面HA涂层性能的影响
3.
Effect of rare earth element on microstructure and mechanical properties of powder metallurgy Ti alloy;
添加稀土元素对粉末冶金Ti合金显微组织和力学性能的影响
6) Ni-Ti alloy
Ni-Ti合金
1.
Study on the vacuum hot-pressed technology of Ni-Ti alloys based on Ni and Ti foils;
基于箔带材Ni-Ti合金的真空热压工艺研究
2.
Preparation of Ni-Ti alloy by direct electrochemical deoxidation in low temperature molten salt
低温熔盐电解制备Ni-Ti合金
3.
The results show that Ti(C,N)-based cermets without Ni-Ti alloy present typical core-rim microstructure and nearly spherical shape of hard phase; the microstructure of cermets gets finer,and the shape of hard phase becomes multiangular with the increasing of Ni-Ti alloy,the interface between hard phase.
采用粉末冶金方法真空烧结制备了添加Ni-Ti形状记忆合金的Ti(C,N)-Co系金属陶瓷,研究了Ni-Ti合金对Ti(C,N)基金属陶瓷显微组织和力学性能的影响。
补充资料：17-Ethinyl-17-hydroxyestr-4-en-3-one 17-acetate；17-Ethinylestr-4-en-17-ol-3-one 17-acetate；17-Acetyloxy-17-ethinylestr-4-en-3-one；Aygestin <
分子式: C22H28O3
分子质量: 340.47
中文名称: 17α-乙炔基-17β-羟基雌甾-4-烯-3-酮17-醋酸酯；17α-乙炔基雌甾-4-烯-17β-醇-3-酮17-醋酸酯；17β-乙酰氧基-17α-乙炔基雌甾-4-烯-3-酮
英文名称: 17-Ethinyl-17-hydroxyestr-4-en-3-one 17-acetate；17-Ethinylestr-4-en-17-ol-3-one 17-acetate；17-Acetyloxy-17-ethinylestr-4-en-3-one；Aygestin
性质描述: 结晶（二氯甲烷-己烷），熔点161-163℃。（±）型：结晶（乙醚），熔点160-162℃。
生产方法: 可用炔诺酮用乙酸酐酰化，然后水解制得该品。
用途: 炔雌醚的中间体。
分子质量: 340.47
中文名称: 17α-乙炔基-17β-羟基雌甾-4-烯-3-酮17-醋酸酯；17α-乙炔基雌甾-4-烯-17β-醇-3-酮17-醋酸酯；17β-乙酰氧基-17α-乙炔基雌甾-4-烯-3-酮
英文名称: 17-Ethinyl-17-hydroxyestr-4-en-3-one 17-acetate；17-Ethinylestr-4-en-17-ol-3-one 17-acetate；17-Acetyloxy-17-ethinylestr-4-en-3-one；Aygestin
性质描述: 结晶（二氯甲烷-己烷），熔点161-163℃。（±）型：结晶（乙醚），熔点160-162℃。
生产方法: 可用炔诺酮用乙酸酐酰化，然后水解制得该品。
用途: 炔雌醚的中间体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条