1) initial water saturation
初始含水饱和度
2) original water saturation
初始水饱和度
1.
The experiment used the real low permeability core and condensate gas sample with high gas condensate content(containing gas condensate:364g/m3)both of which come from Qiaobai gas field in Zhongyuan to research the effects of the porous media and original water saturation on gas condensate saturation and residual oil saturation and that the porous media on dew pressure of condensate gas.
采用中原桥白气藏实际低渗透储层岩心和配置的高含凝析油型(凝析油含量364g/m3)凝析气样分别从实验、数值模拟角度研究衰竭过程中,多孔介质、初始水饱和度对凝析油饱和度和残余油饱和度的影响,以及多孔介质对凝析气露点压力影响。
3) initial oil saturation
原始含油饱和度
1.
Study on a new method for evaluating initial oil saturation of reservoir;
储层原始含油饱和度评价新方法研究
2.
Calculation procedures of initial oil saturation of low resistivity oil layers and their significances;
低阻油层原始含油饱和度的计算方法及研究意义
3.
Combining the production data with reservoir fluid data and its parameters,this paper deduced a new method to get the initial oil saturation and current oil saturation in a reservoir.
基于Buckley-Leverett油水两相非活塞驱替理论、原苏联油藏专家ЭΦРСО(艾富罗斯)的实验理论及中国已故院士童宪章的计算储量的经验公式,结合现场生产资料和油藏流体的物性参数,推导出求取油藏原始含油饱和度和目前油藏含油饱和度的一种新方法。
4) original oil saturation
原始含油饱和度
1.
Method for estimating original oil saturation of watered out layers;
水淹层原始含油饱和度的估算方法探讨
2.
Resolving and advance of original oil saturation in sandstone reservoirs;
砂岩储层原始含油饱和度的求取与发展
3.
Aim at the structural reservoir which fit in with the tradition, we improve the oil height method which is used to calculate the original oil saturation.
运用油藏工程方法及资料 ,针对传统的构造油藏 ,对利用压汞资料计算油藏原始含油饱和度的“油柱高度法”进行了方法改进。
5) water saturation
含水饱和度
1.
Prediction of reservoir water saturation by genetic programming;
基于遗传规划的储层含水饱和度预测方法
2.
Stress sensitivity of fractured tight gas sands in consideration of fractures and water saturation;
考虑裂缝和含水饱和度的致密砂岩应力敏感性
3.
Evaluation method of water saturation around water injection wells in high water cut stage and its application;
高含水期注水井周围含水饱和度评价方法及应用
6) water saturation
水饱和，含水饱和度
补充资料：含水不饱和聚酯树脂
分子式：
CAS号：
性质：又称含水不饱和聚酯树脂，水扩展聚酯，充水聚酯。不饱和聚酯树脂的水乳液。不燃烧，其他物理机械性能随含水量增加而下降。通常采用1,6-己二醇和无水顺丁烯二酸酐制成水溶性不饱和聚酯，加入水溶性单体、水、固化剂、促进剂和乳化剂制成水-油型(W/O)或油-水型(O/W)乳液，固化后使用。可作为合成木材、家具装饰材料，也可制成泡沫材料用于建筑隔热材料。
CAS号：
性质：又称含水不饱和聚酯树脂，水扩展聚酯，充水聚酯。不饱和聚酯树脂的水乳液。不燃烧，其他物理机械性能随含水量增加而下降。通常采用1,6-己二醇和无水顺丁烯二酸酐制成水溶性不饱和聚酯，加入水溶性单体、水、固化剂、促进剂和乳化剂制成水-油型(W/O)或油-水型(O/W)乳液，固化后使用。可作为合成木材、家具装饰材料，也可制成泡沫材料用于建筑隔热材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条