2) PVC calendaring leather
PVC压延革
1.
Research of special ADC blowing agent for PVC calendaring leather and its application;
PVC压延革专用ADC发泡剂的研制与工业应用
3) PVC rolling film
PVC压延膜
1.
Reasons for the printing adhesion of PVC rolling film and its improvement;
PVC压延膜印刷粘着现象的原因及改进
4) Luritherum process
鲁利特乌姆法<硬PVC片材低温压延法>
5) polyvinyl chloride
PVC
1.
Application of high - purity hydrogen chloride-byproduct from potassium sulfate production in polyvinyl chloride production;
K_2SO_4装置副产高纯度HCl在PVC生产中的应用
2.
The effect of CaCO3 nanoparticle and acrylic rubber content on the mechanical properties of polyvinyl chloride(PVC) was studied.
研究了纳米碳酸钙和丙烯酸酯橡胶(ACR)二元增韧聚氯乙烯(PVC)材料,主要考察了丙烯酸酯橡胶以及纳米碳酸钙用量对PVC力学性能的影响,并采用扫描电镜、透射电镜对复合材料的结构进行了观察。
3.
Sealing strip using in automobile door or window was produced by using the polyvinyl chloride(PVC) elastomerics of high polymerization degree as host resin which was modified by blending with nitrile-butadiene rubber(NBR).
以高聚合度PVC弹性体为主体树脂,用丁腈橡胶进行共混改性制备了汽车门窗密封条;对试样进行了硬度、拉伸强度、断裂伸长率、热老化等性能试验;对老化后的试样表面进行了SEM表征。
6) Poly(vinyl chloride)
PVC
1.
Study on Properties and Preparation of Ultrafiltration Membrane from Polyurethane/Poly(vinyl chloride) Blends;
PU/PVC共混超滤膜的制备及性能
2.
Poly(vinyl chloride) was aminated by ethanolamine in DMF and aminated polymers with different content of nitrogen were made under the optimum reaction conditions : the reaction temperature 80℃, molar rate of amine to poly(vinyl chloride) 11, the reaction time within 36h ,and the reaction pressure 2.
确定了最佳反应条件:温度80℃,PVC结构单元与乙醇胺的摩尔比1/1,反应时间小于36 h,反应压力2。
3.
The comprehensive information in both gas phase and condensed phase can be acquired by using cone calorimeter which was used to investigate the synergistic effect of Cu 2O and MoO 3 on flame retardance and smoke suppression of poly(vinyl chloride)(PVC) in this paper.
用锥形量热仪 (CONE)研究Cu2 O/MoO3 体系对PVC的阻燃和抑烟协同效应可以同时获得气相和凝聚相的综合信息。
补充资料：压延机油
分子式：
分子量：
CAS号：
性质：也称滚轧机油，轧钢机油。主要用于大型轧钢机的齿轮、轴承、油压装置及其他机械零件的润滑油。还用于剪断机、无缝钢管钻孔机以及具有循环系统并在高温下操作和重负荷机械。要求耐高温、耐冲击负荷，并能形成坚固油膜。为抗齿轮表面擦伤或烧结，除选择粘度适当的深度精制的润滑油外，还应加入抗磨油性添加剂和极压添加剂。
分子量：
CAS号：
性质：也称滚轧机油，轧钢机油。主要用于大型轧钢机的齿轮、轴承、油压装置及其他机械零件的润滑油。还用于剪断机、无缝钢管钻孔机以及具有循环系统并在高温下操作和重负荷机械。要求耐高温、耐冲击负荷，并能形成坚固油膜。为抗齿轮表面擦伤或烧结，除选择粘度适当的深度精制的润滑油外，还应加入抗磨油性添加剂和极压添加剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条