1) Csf/Al composite materials
Csf/Al复合材料
1.
The finite element simulation of mechanical behavior in hot compression for Csf/Al composite materials;
Csf/Al复合材料热压缩变形力学行为的数值模拟
2) Csf/BAS composites
Csf/BAS复合材料
3) Csf/SiC composite
Csf/SiC复合材料
1.
XRD,SEM and isothermal oxidation test were used to study the isothermal oxidation property of Csf/SiC composite.
因此,Csf/SiC复合材料在此温度范围内具有良好的抗氧化能力;当复合材料在1600℃氧化时,氧化反应剧烈,材料破坏严重,失去了抗氧化能力。
4) Al SiC w/Al composites
Al-SiC_w/Al复合材料
5) B4C/Al composites
B4C/Al复合材料
1.
The phase composition of B4C/Al composites fabricated by pressureless infiltration was analyzed,and th.
分析了无压浸渗法所制备B4C/Al复合材料的相组成,并测试了其力学性能。
6) SiCp/Al MMCs
SiCp/Al基复合材料
1.
In order to analyze the weldability of SiC particle reinforced aluminum metal matrix composites(SiCp/Al MMCs),plasma arc in-situ welding of SiCp/Al MMCs was carried out using argon-nitrogen mixture as plasma gas with Ti-Mg mixed powder as in-situ material.
为分析SiCp/Al基复合材料的焊接性,以Ti-Mg混合粉末作为填充材料,采用氮氩混合等离子气体对SiCp/Al基复合材料进行等离子弧原位焊接。
2.
Plasma arc "in-situ" welding of SiCp/Al MMCs were carried out using argon-nitrogen mixture as plasma gases with Ti-Ni alloying as "in-situ" material.
以Ti-Ni合金作为填加材料,采用氮氩混合等离子气对SiCp/Al基复合材料进行等离子弧原位焊接。
3.
In this paper,SiCp/Al MMCs were selected as research objects,and process and mechanism of SiCp/6061Al MMCs by plasma arc welding(Ar and N2 as ionized gas, Ar as fielded gas) were systematically studied.
研究表明填加Al-Si-Ti-Ni合金对SiCp/Al基复合材料进行等离子弧原位焊接,填加材料中Ti含量为5%时,可以有效抑制有害相Al_4C_3的生成,得到的焊缝组织较为致密,没有气孔、微观裂纹等缺陷,接头强度较之不加填充材料时有较大提高,达到226MPa,提高了接头的力学性能。
补充资料：CSF
分子式：
CAS号：
性质：CSF=LD1/ED99。LD1为1％的致死量。ED99为99％的有效量。
CAS号：
性质：CSF=LD1/ED99。LD1为1％的致死量。ED99为99％的有效量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条