1) crystallizability
结晶能力
1.
Analysis on microstructure and crystallizability of PBT/PEG copoly(ether-ester) fiber;
PBT-PEG共聚醚酯纤维的微观结构和结晶能力分析
2.
The kinetic crystallizability of PTT was calculated from the nonisothermal crystallization curves.
采用DSC研究了聚对苯二甲酸丙二醇酯(PTT)在不同等速降温速率下的结晶过程,并利用由等温Avrami方程推导得到的两种不同的等速降温非等温结晶方程,研究了其结晶动力学,得出PTT的成核方式为异相成核,同时利用拟和法计算了PTT的结晶能力,发现在同等条件下PTT的结晶能力大于PET。
3.
Their crystallizability was calculated with Ziabicki equation and concluded as PBT>PTT>PET.
通过计算Ziabicki结晶能力参数,得到3种聚酯的结晶能力的顺序 为:PBT>PTT>PET。
2) Crystallization
[英]['kristəlai'zeiʃən] [美][,krɪstḷɪ'zeʃən]
抗结晶能力
1.
Resistance to Crystallization of Soybean Salad Oil;
大豆色拉油抗结晶能力研究
3) Kinetic crystallizability
动力学结晶能力
1.
The method for calculating kinetic crystallizability from the nonisothermal crystallization curves determined by using differential scanning calorimetry (DSC) has been investigated.
研究了从非等温ＤＳＣ结晶曲线计算高聚物动力学结晶能力的方法。
4) Crystal structure and Mechanical properties
晶体结构和力学性能
5) crystallinity
结晶性能
1.
In this paper,the effect of APP and Deflam on the flame retardance,the mechanical properties of the prepared composite,and the crystallinity of PP were studied.
采用聚磷酸铵(APP)和Deflam(敌火龙)分别对聚丙烯(PP)进行了填充改性,研究了两者对PP力学性能、阻燃性能、结晶性能的影响。
2.
The effects of nano-CaCO_3 particles on the crystallinity of PCL and the nano-CaCO_3 content on the mechanical properties as well as shape memory properties of the blends were investigated.
用熔融共混法制备了聚己内酯(PCL)/纳米CaCO3复合材料,考察了纳米CaCO3对PCL结晶性能和纳米CaCO3含量对PCL/纳米CaCO3复合材料力学及形状记忆性能的影响。
3.
The influence of glass fiber, flame retardant and nucleating agent on the crystallinity and mechanical properties of polyethylene terephthalate (PET) was investigated.
研究玻纤、阻燃剂和纳米成核剂对聚对苯二甲酸乙二酯(PET)结晶性能及力学性能的影响。
6) crystallization properties
结晶性能
1.
Optimization of crystallization properties of mold flux for slab casting of medium-carbon steel
中碳钢板坯保护渣结晶性能的优化
2.
Effect of CeO2 on break temperature and crystallization properties of mold fluxes,and the comparison of properties between low-fluoride and high-fluoride content mold fluxes were studied.
研究了低氟条件下,稀土氧化物CeO2对连铸保护渣转折温度和结晶性能的影响,同时与常规的高氟连铸保护渣性能进行了对比分析。
3.
Based on the summarization of current situation of fluorine-free mould fluxes at home and abroad,the main problem during decreasing fluorine for high carbon steel and peritectic steel mould fluxes was analyzed,which includes the stability between viscosity and temperature at high temperature as well as effective control of crystallization properties.
综述了国内外无氟连铸结晶器保护渣发展状况,分析了目前高碳钢和包晶钢(特别是亚包晶钢)用保护渣降氟过程中面临的主要问题:高温时粘度-温度特性的稳定性以及保护渣结晶性能的有效控制。
补充资料：二次再结晶(见再结晶晶粒长大)
二次再结晶(见再结晶晶粒长大)
secondary recrystallization
erCI 201」le」Ing二次再结晶(seeondary reerystallization) 见再结晶晶杠长大。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条