1) recoating efficiency
涂层效率
1.
In order to increase the speed of recoating and ensure the quality of recoating for improvement of the efficiency of stereolityography,this paper discussed the relation between parameters of recoating and recoating efficiency,obtained the rule of how recoating parameters to influence the quality and efficiency,and proposed the intelligent recoating method.
为提高涂层效率和保证涂层质量从而达到提高光固化成形效率的目的,对光固化涂层参数与涂层质量和涂层效率的关系进行了研究,得出了各参数对涂层质量和涂层效率的影响规律,提出了根据层片形状优化涂层参数的智能涂层工艺。
2) coating failure
涂层失效
1.
The results showed that the formation of corrosion cell brought out the coating failure and the main corrosion mechanism is the diffusion of corrosiveness.
本文在综述了国内外钢桥梁的腐蚀与防护现状基础上,讨论了防腐蚀涂层失效的主要因素:辐射、水和温度,并对其所产生的影响进行了讨论,分析了涂层的失效过程和失效机理。
3) Coating effects
涂层效应
1.
In this paper a micromechanical model of fiber-reinforced metal matrix composites is established with considering the coating effects.
本文着重论述考虑涂层效应的纤维增强金属基复合材料的热机械加载细观力学模型。
4) transfer efficiency of coatings
涂着效率
1.
Increasing the transfer efficiency of coatings is not only one of the main ways, but also the most efficient way to realize the present coating requirements of energy saving, environment protection and low cost.
提高涂着效率是实现当前工业涂装省能源、环保、降低成本要求的主要技术手段之一,也是最有效的捷径。
5) coating efficiency
涂渍效率
1.
The result shows that the coating efficiency is about 90%at the concentrationof 1.
９％时，涂渍效率在９０％以上，柱效和容量因子也较高。
6) the efficient coater
高效涂层器
1.
The paper introduces basic structures of the efficient coater, and discuses operating velocity and factors to be considered in the process development.
本文介绍了新型高效涂层器的基本结构、操作条件以及开发过程中所考虑的因素。
补充资料：配置效率和生产效率
在经济学上，经济发展的动力，或者说效率的来源，分为两类：一类是配置效率，二是生产效率。所谓配置效率，是指给定资源和技术的条件下，怎么样使资源从边际生产率低的地方流向边际生产率高的地方，从而使得资源和利用更合理、社会总价值达到最大;而生产效率是指如何通过技术进步提高每一种资源的生产率，也就是把社会的生产可行性边界向外移。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条