1) tensile curve
拉伸曲线
1.
A method for measuring transformation energy (Ept) of strain-induced martensite has been proposed from the tensile curves of 3 metastable steels.
依据应变诱发马氏体相变材料拉伸曲线的特点，提出了一种应变诱发马氏体相变能 Ｅｐｔ的测定方法，并测定了 ３种材料在弹塑性失稳与应力平台阶段的相变能。
2.
The results show that tensile curve of the pipeline steel is changed from round-house continuous yielding type to Luder\'s elongation yielding type after strain aging, and the strength and σs /σb ratio of the pipeline steel increase but total elongation decreases.
结果表明:应变时效后管线钢的拉伸曲线由拱顶型连续屈服曲线转变为吕德斯伸长型屈服曲线;时效后管线钢的强度升高,屈强比增大,伸长率下降。
2) stretching curve
拉伸曲线
1.
New Characteristic Indexes of Stretching Curve of Bicomponent Fiber Bundle and Its Application Research;
双组分纤维束拉伸曲线特征指标及应用研究
3) Brabender extension curve
Brabender拉伸曲线
4) single pulling test
静拉伸曲线
5) stretch along a curved line
曲线拉伸流动
6) tension leveling
拉伸弯曲
1.
Theoretical Investigation into Continuous Tension Leveling Process of Metal Strip (2) --Analysis on the tension leveling process of elastic-perfect plastic metal strip over the first bending roll;
金属带材拉伸弯曲矫直过程简化解析分析之二─—理想弹塑性带材在第1个弯曲辊上的拉弯过程分析
2.
This paper expounds the characteristics of tension leveling and application in copper fabricating industry,and studies the selection and optimization for the main technological parameters.
本文论述了拉伸弯曲矫直技术的特点及其在铜加工领域的应用,同时探讨了相关工艺参数的选取和优化等问题。
3.
In this paper, the method to calculate the energy consumption and variation of tension during tension leveling of metal strips is investigated and formulae for the elastic-perfect material are suggested which are useful for the design of a continuous tension leveler.
了解带材拉伸弯曲时的弯曲能耗和张力变化是合理设计拉伸弯曲矫直机的基础 。
补充资料：拉伸曲线
分子式：
CAS号：
性质：纺织材料、纺织品在拉伸变形至断裂过程中，拉力(负荷)与伸长变形的关系曲线。由此曲线可得出断裂强力、伸长、断裂功等参数。在纤维强力试验机上，根据纤维拉伸至断裂的全过程，可作出负荷—伸长曲线。此曲线的坐标转换成相对强力和伸长率后绘制的曲线成为应力-应变曲线。负荷-伸长曲线(load-elongation curve)和应力一应变曲线(stress-strain curve)统称拉伸曲线。
CAS号：
性质：纺织材料、纺织品在拉伸变形至断裂过程中，拉力(负荷)与伸长变形的关系曲线。由此曲线可得出断裂强力、伸长、断裂功等参数。在纤维强力试验机上，根据纤维拉伸至断裂的全过程，可作出负荷—伸长曲线。此曲线的坐标转换成相对强力和伸长率后绘制的曲线成为应力-应变曲线。负荷-伸长曲线(load-elongation curve)和应力一应变曲线(stress-strain curve)统称拉伸曲线。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条