说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 镍-铁-磷/金刚石
1)  Ni-Fe-P/diamond composite coating
镍-铁-磷/金刚石
1.
Thus orthogonal test was used to investigate the technology for the electrodeposition of Ni-Fe-P/diamond composite coating,with the frictio.
为开发新型多元非晶态合金耐磨复合沉积层,以复合沉积层耐磨减摩性为主要衡量指标并综合考虑其他性能指标,用正交试验法进行了镍-铁-磷/金刚石复合电沉积工艺与性能的研究。
2)  nickel-phosphorus-diamond
镍-磷-金刚石
1.
The effects of plating parameters on deposition rate,diamond content and hardness of nickel-phosphorus-diamond composite are studied.
研究了化学复合镀镍-磷-金刚石镀层操作条件对复合镀层镀速、复合量及硬度的影响,并对复合镀层的组织和性能进行了分析。
3)  Nickel phosphorus diamond
镍磷金刚石
4)  Ni-Fe-diamond
镍铁-金刚石
1.
Study on Brush Composite Plating Ni-Fe-diamond Technology;
镍铁-金刚石复合电刷镀的工艺研究
2.
This paper analyses some factors that influence the brush composite plating Ni-Fe-diamond technology, including temperature?voltage and relative velocity, and acquires optimal technical parameter of high content and high wear.
文章通过对镍铁-金刚石复合电刷镀工艺中温度、电压和相对速度的试验研究,获得了高的金刚石含量和高耐磨性的最佳工艺参数。
5)  nickel coated diamond
镍包金刚石
6)  Fe-Ni-P alloy
铁-镍-磷合金
1.
The results show that the values of pH and Dk for electrodeposition have a great influence on the magnetic parameters of amorphous Fe-Ni-P alloy, and magnetic field electrodeposition can effectively adjust the magnetic properties of Fe-Ni-P alloy.
本文通过对电沉积铁-镍-磷合金磁性能的的测定,探讨了不同电沉积工艺参数及施加磁场电沉积对合金主要技术磁参量(μ_0、H_c、B_r、Ph及Bs)的影响规律;并获得具有较佳磁性能的电沉积工艺参数。
补充资料:胶磷石
分子式:Ca3P2O8·H2
CAS号:

性质:又称胶磷石。含五氧化二磷43.30%。非晶质,似蛋白石,层状,有时呈结核状、球粒状或粉末状等。无色、白色、黄色、褐色或灰白色等。玻璃光泽至暗淡的松脂光泽。硬度3.5。密度2.6~2.9g/cm3。溶于酸;滴上钼酸铵有黄色反应。是一种具有胶状构造的细分散相磷灰石。为磷块岩、沉积磷质石灰岩、磷钙土、磷酸岩的主要成分,由生物和生物化学沉积而成。常与石膏、方解石、三斜磷钙石等伴生。用于提取元素磷和制造磷肥。参见磷块岩。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条