1) flight and solidification
飞行与凝固
1.
The flight and solidification of a nickel droplet was simulated.
建立了旋转盘离心雾化熔滴飞行与凝固进程的一个数学模型,并用Runge-Kutta方法进行数值求解,模拟镍金属熔滴飞行与凝固的基本情况,探讨过程和材料参数的影响。
2) Solidification Behavior
凝固行为
1.
Reversibility of the Liquid-liquid Structure Transition in Sn-70Bi Alloy and its Solidification Behavior;
Sn-70Bi合金熔体结构转变的可逆性及其凝固行为
2.
Solidification Behavior of Bi in Se-Bi Brass;
硒铋黄铜中铋的铸造凝固行为研究
3.
Effects of TiC Particles on As-cast Microstructure,Mechanical Properties and Solidification Behavior of ZA84 Magnesium Alloy;
TiC对ZA84镁合金铸态组织和力学性能及凝固行为的影响
3) solidification behaviors
凝固行为
1.
Moreover,the L-LST had a visible effect on the solidification behaviors and morphologies of Pb-Sb30% alloy.
在前期研究发现一些二元合金在液相线上数百度温度范围内发生温度诱导液-液结构转变的基础上,进一步研究了Pb-Sb30%合金液-液结构转变的可逆性,结果表明,该合金熔体发生的结构转变是不可逆的;并探讨了液-液结构转变对其凝固行为及组织的影响,发现结构变化后的熔体凝固过冷度增大,初生相和共晶相组织明显细化,且维氏硬度值提高约30%。
2.
In this paper, from the viewpoint of melt structure transition, the solidification behaviors and morphologies of Sn–Bi and Sn–Sb alloys under different melt overheating treatments were studied in details.
前期工作中发现Sn-10%Bi、Sn-40%Bi和Sn-57%Bi合金及Sn-10%Sb合金存在温度诱导的液-液结构转变现象,这些熔体结构与性质及其变化特点等方面的信息有利于探索熔体结构转变对凝固行为、凝固组织的影响及作用规律。
4) Heat Transfer and Solidification
凝固与传热
1.
A Study on Simulation of Heat Transfer and Solidification of Molten Steel in Mold for 280 mm×380 mm Billet Casting;
280mm×380mm铸坯结晶器内钢水凝固与传热仿真研究
5) Filling and Solidification
充型与凝固
1.
Development of Mold Filling and Solidification Simulation System Based on Polar Coordinates;
基于柱坐标系的充型与凝固模拟系统的开发
6) solidification and shaping
凝固与成形
补充资料：复杂气象飞行(见飞行技术)
复杂气象飞行(见飞行技术)
instrument meteorological conditions flight
fuza qixiangfe主xing复杂气象飞行(instrument meteorologiealconditions flight)见飞行技术。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条