1) GCr18Mo bearing steel
GCr18Mo轴承钢
1.
Pilot Production of High Quality Heavy Round Sections of GCr18Mo Bearing Steel;
高品质大规格GCr18Mo轴承钢的试制
2.
Morphologies and fine structure of lower bainite of GCr18Mo bearing steel were analyzed using optical microscope(OM) and transmission electron microscope(TEM),and transformation mechanism of lower bainite was discussed.
利用光学显微镜和透射电镜观察和分析了GCr18Mo轴承钢的下贝氏体组织形貌和精细结构,探讨了下贝氏体组织转变机理。
2) GCr18Mo steel
GCr18Mo钢
1.
Effect of heat treatment processes on microstructure and hardness of GCr18Mo steel
热处理工艺对GCr18Mo钢组织及硬度的影响
3) steel-on-steel bearing
钢-钢轴承
4) bearing steel
轴承钢
1.
Optimization and design of thickness of bearing steel layer diffusion bonding on titanium alloy surface;
钛合金表面扩散焊接轴承钢硬化层厚度的优化设计
2.
Formation and controlling of calcium-aluminates inclusions in bearing steel;
轴承钢中钙铝酸盐夹杂物的形成及控制
3.
An Analysis on Micro-Inclusion in Bearing Steel at Each Procedure of BOF-LF-VD-CC Flow Sheet;
转炉-LF-VD-CC流程轴承钢显微夹杂物的分析
5) GCr15 Bearing Steel
GCr15轴承钢
1.
A Study on High Temperature Mechanical Properties of GCr15 Bearing Steel;
GCr15轴承钢高温力学性能的研究
2.
Finite Element Analysis on Internal Stress of Rolling Workpiece of GCr15 Bearing Steel;
GCr15轴承钢轧件内部应力的有限元分析
3.
Practice of GCr15 Bearing Steel Production by 50 t EBT EAF-LF(VD)-CC Process;
莱钢50t EBT EAF-LF(VD)-CC生产GCr15轴承钢的工艺实践
6) 9Cr18 bearing steel
9Cr18轴承钢
1.
Metal ion implantation, nitrogen ion implantation, metal ion plus nitrogen ion co-implantation are used to improve the working surface of 9Cr18 bearing steel by various plasma immersion ion implantation (PIII) processes.
采用不同的等离子体浸没离子注入 (PIII)工艺在 9Cr18轴承钢表面进行了气体、金属、金属加气体的离子注入和碳化钛 (TiC)、类金刚石 (DLC)薄膜的等离子体浸没离子注入与沉积 (PIIID)。
补充资料：GCr15钢中的大型非金属夹杂物(铝酸盐)×500
GCr15钢中的大型非金属夹杂物(铝酸盐)×500
GCrl5钢中的大型非金属夹杂物(铝酸盐) ×500
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条