说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> Gibbs能
1)  Gibbs energy
Gibbs能
1.
The transition data and Gibbs energy functions of pure elemental Cu in SGTE database were reassessed using the least-square method and adopting the newly available thermochemical reference JANAF data in the fourth(edition).
采用SGTE纯单质数据库中Gibbs能的表达式,结合JANAF热力学实验数据,用最小二乘法对金属元素Cu的Gibbs能表达式进行重新评估。
2.
The correction of transition data and reassessment of the parameters of Gibbs energy of elemental Mg were performed with the least-square method and the results agree more accurately with JANAF data than those of SGTE database.
采用最小二乘法对SGTE纯单质数据库中金属Mg的Gibbs能表达式进行了重新评估,得到了比SGTE数据库更精确的结果;同时,将SGTE数据库的晶格稳定参数外推至0K,与第一原理总能赝势平面波方法的结果进行了对比,发现第一原理的晶格稳定参数结果为△Gbcc-hcp>△Gfcc-hcp>0,与SGTE外推结果一致。
3.
Taking the form of Gibbs energy functions in the SGTE(Scientific Group Thermodata Europe) database of pure elements,adopting the newly available thermochemical reference data of JANAF(Joint Army-Navy-Air Force) database,the correction of transition data and reassessment of the parameters of Gibbs energy of elemental Si have been performed with the least-square method.
采用SGTE纯单质数据库中Gibbs能的表达式,结合JANAF热力学数据,采用最小二乘法对SGTE纯单质数据库中元素Si的Gibbs能表达式进行了重新评估,得到了比SGTE数据库更精确的结果;同时,将SGTE数据库中CALPHAD方法得到的晶格稳定参数外推至0K,与第一原理总能赝势平面波和投影缀加波方法的结果进行了对比,发现第一原理总能赝势平面波方法得到的晶格稳定参数结果为△Gfcc-diamond>△Ghcp-diamond>△Gbcc-diamond>0,与CALPHAD方法外推结果一致。
2)  Gibbs free energy
Gibbs自由能
1.
CALPHAD is the method for calculation of the phase equilibria based on the experimental data,thermodynamic models and the minimisation of Gibbs free energy.
相图计算主要是依据实验数据,建立热力学模型,根据Gibbs自由能最小原理计算相平衡。
2.
The Gibbs free energy change of nucleation from liquid Al_2O_3 and transition from γ-Al_2O_3 to α-Al_2O_3 are calculated during deposition of corundum.
针对陶瓷膜层在形成过程中的两次相变,分析计算Al2O3液相中的形核过程以及γ-Al2O3向α-Al2O3转变过程Gibbs自由能的变化,分析相变驱动力与温度及过冷度的关系。
3)  Gibbs potential function
Gibbs势能函数
1.
Finally,the corresponding Gibbs potential functions are defined based on these filtered motion vectors.
再根据P帧中的分块模式,采用不同的滤波器对运动矢量进行滤波;最后利用滤波后的运动矢量信息建立对应的Gibbs势能函数,采用迭代条件模式方法求解最大后验概率,得到可靠的运动对象标记。
4)  excess Gibbs free energy
过量Gibbs自由能
5)  excess Gibbs free energy
超额Gibbs自由能
6)  Gibbs free eneryy of tramsfer
迁移Gibbs自由能
补充资料:Gibbs adsorption isotherm
分子式:
CAS号:

性质:指吸附剂单位面积上的吸附量和浓度(或压力)成线性关系区间的那一段吸附等温线。它可以用Gibbs吸附方程式表示:,式中,σ是单位面积上的吸附量,mol/cm2;C是浓度,mol/cm3;只是气体常数;丁为绝对温度,K;是在恒定的表面积w下,表面能对浓度的偏导数;在恒温下,对于气体可得σ=k1P;对于液体,可得σ=k2C。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条