1) reactive spray
反应喷涂
1.
SHS reactive spray technology, which was developed through the combination of the SHS technology and the traditional spray technology, has been developed rapidly recently.
自蔓延高温合成技术与传统热喷涂技术相融合发展的SHS反应喷涂技术,近年来获得了迅速发展。
2) reactive plasma spray
反应喷涂
1.
In this paper, nanostructured multi-phases coatings was fabricated by sprayed Ti-Al mixed-powders, via reactive plasma spraying (RPS), using the self-designed gas-tunnel type reaction camber.
在无润滑条件下,反应喷涂AlN/TiN复相涂层的耐磨性高于TiN涂层,在高载荷下,其耐磨性是TiN涂层。
3) reactive thermal spraying
反应热喷涂
1.
Application of reactive thermal spraying in the preparation of ceramic blade of coating machine;
反应热喷涂法制备陶瓷刮刀
2.
A kind of Ni-Ti-C composite powder for reactive thermal spraying was prepared by thermal decomposition of precursor with sucrose as carbon source.
以蔗糖为碳源,采用前驱体热分解技术制备Ni-Ti-C系反应热喷涂混合粉末,通过氧乙炔火焰喷涂技术合成并同时沉积原位TiC颗粒增强的Ni基合金复合涂层。
4) reactive thermal spray
反应热喷涂
1.
Making a comparison between ceramic coating and metal coating blade and cast iron drum dryer for wear-resist properties, we come to the conclusion that reactive thermal spraying process can enhance coati.
通过热喷涂技术并引入放热组元,制备出金属陶瓷涂层,检测了该涂层的结合强度、硬度及耐磨性;研究了反应热喷涂Al2O3金属陶瓷涂层在涂布刮刀、烘缸上的耐磨性能,并将其与金属涂布刮刀及铸铁烘缸的耐磨性能进行了比较。
2.
The results shows: reactive thermal spraying process promoted coating performance, the bonding strength of the coatings is 20MPa and porosity ratio is 5.
研究了反应热喷涂工艺及其制备的 Al2 O3金属陶瓷涂层的性能。
5) reactive flame spray
反应火焰喷涂
1.
Influence of reactive flame spraying process on properties of multi-phased ceramic coating;
反应火焰喷涂工艺对复相陶瓷涂层孔隙率和硬度的影响
2.
Study on SHS reactive flame sprayed multiphase ceramic coatings;
自蔓延反应火焰喷涂复相陶瓷涂层研究
3.
TiC/Fe metal ceramic composite coating by reactive flame spray;
反应火焰喷涂的TiC/Fe金属陶瓷复合涂层
6) Reactive Plasma Spraying
反应等离子喷涂
1.
Studying of Reactive Plasma Spraying TiN-Al_3Ti-Al Composite Coating;
反应等离子喷涂TiN-Al_3Ti-Al复相陶瓷涂层的研究
2.
TiC/Fe-Ni composite coating prepared by reactive plasma spraying and its erosion wear performance
反应等离子喷涂TiC/Fe-Ni复合涂层及其耐冲蚀性能
3.
TiN composite coatings were prepared by means of reactive plasma spraying(RPS)titanium powders,and the microstructure and performance of the composite coatings were analyzed.
采用反应等离子喷涂技术制备了TiN复相涂层,并分析了复相涂层的组织及其性能。
补充资料：反应素性变态反应
反应素性变态反应
见"I型变态反应"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条