1) Coating layer
涂料层
2) coating material
涂层材料
1.
Research progress on antibacterial property of hydroxyapatite coating materials;
羟磷灰石抗菌性涂层材料的研究
2.
The latest research advances in tool coating materials,tool coating structure and the coating technology are investigated and summarized.
本文介绍了各种刀具涂层材料、刀具涂层结构和刀具生长工艺的研究现状。
3.
Based on the theory of spatial axisymmetrical elasticity, the theoretical solution of a normal force acting at the free surface of two bonded dissimilar coating materials with the same thickness was deduced by introducing mirror point method and the fundamental solution of a semi-infinite body suffering a concentrated force.
基于三维轴对称弹性理论,通过利用镜像点方法和半无限体表面受法向集中力作用的基本解,推导了等厚双层涂层材料受法向集中力作用的显式理论解。
3) coating materials
涂层材料
1.
The coating materials and coating mathods of coating tools and its development;
涂层刀具的涂层材料、涂层方法及发展方向
2.
By optical theory and heat-conducting mechanism, the temperature-lowering mechanism of coating materials is studied and the high-efficiency heat-shielding temperature- lowering anticorrosion coating materials of dark color and tint color are prepared.
应用光学原理、热传导机理,通过对涂层材料降温机理的研究,制备出从浅色到深色的高效热屏蔽降温防腐涂层材料。
3.
Interface strength is one of the most important properties of coating materials.
界面强度是薄膜涂层材料的最重要的性能指标之一,目前尚缺乏有效的测量方法。
4) thin-film coatings
薄层涂料
5) plastic coating material
涂层料
1.
A new digital media-Mesh is prepared by polyester basic fabric and plastic coating material.
采用涤纶网格基布和高分子涂层料研制出了高分子数码喷绘网格材料,并进一步探讨了其工艺条件、原材料的选择及在大型喷绘广告和建筑防护栏中的应用。
6) coated material
涂层材料
1.
With the fast development of coating technology, coated materials are extensively used in many areas.
随着现代涂层技术的不断发展，涂层材料的应用越来越广泛。
2.
Based on the wave propagation model of coated material,the surface wave produced by pulse-wave was examined which is applied on the coating surface,the dynamic properties of the receivers along the surface were then collected,and the interfacial crack was detected by waveform analysis.
本文基于薄膜涂层材料中波传播的模型,考察了在涂层表面施加冲击脉冲激发表面波,测取涂层表面各点的动态特性,结合波形分析技术进行界面缺陷检测的可行性。
补充资料：复层建筑涂料
分子式：
分子量：
CAS号：
性质：又称浮雕涂料、喷塑涂料或凹凸花纹涂料(textured coatings)。是一种显现凹凸花纹的多层内墙或外墙用涂料。由底层、主涂层和面涂层（包括罩光层）组成。主涂层通过喷涂，形成厚度为1~5毫米的凹凸（或压平）的花纹，使整个涂膜具有立体质感。依据主涂层所用粘结剂不同，分为（1）聚合物水泥系；（2）硅酸盐系；（3）合成树脂乳胶系；（4）反应固化型合成树脂乳胶系。以合成树脂乳胶系应用最普遍。底涂层即封闭剂是用乳液与适量助剂配成。合成树脂乳胶系涂料用丙烯酸或乙烯系乳液加入颜料、填料及助剂配制而成的厚浆状涂料。面涂层使用平光或有光乳胶漆。分层施工，主涂层采用专用工具喷涂，面涂层可用辊涂或喷涂。
分子量：
CAS号：
性质：又称浮雕涂料、喷塑涂料或凹凸花纹涂料(textured coatings)。是一种显现凹凸花纹的多层内墙或外墙用涂料。由底层、主涂层和面涂层（包括罩光层）组成。主涂层通过喷涂，形成厚度为1~5毫米的凹凸（或压平）的花纹，使整个涂膜具有立体质感。依据主涂层所用粘结剂不同，分为（1）聚合物水泥系；（2）硅酸盐系；（3）合成树脂乳胶系；（4）反应固化型合成树脂乳胶系。以合成树脂乳胶系应用最普遍。底涂层即封闭剂是用乳液与适量助剂配成。合成树脂乳胶系涂料用丙烯酸或乙烯系乳液加入颜料、填料及助剂配制而成的厚浆状涂料。面涂层使用平光或有光乳胶漆。分层施工，主涂层采用专用工具喷涂，面涂层可用辊涂或喷涂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条