1) polyether modified polysiloxane
聚醚改性聚硅氧烷
1.
Synthesis and performance analysis of polyether modified polysiloxane defoaming agent;
聚醚改性聚硅氧烷消泡剂的合成及性能
2.
A polyether modified polysiloxane(PMP) was synthesized through addition reaction between a low hydrogen silicone oil and an allyl terminated polyoxyalkylene at the presence of chloroplatinic acid as catalyst and was compounded with a silica,emulsifiers,and a thickener in water to give a high performance defoamer for crude oil.
以氯铂酸作催化剂使端烯丙基聚醚与低含氢硅油进行硅氢加成,合成了聚醚改性聚硅氧烷,再与二氧化硅、乳化剂及增稠剂复配,得到性能优良的原油消泡剂。
3) polyether-modified polysiloxane phosphate
聚醚改性硅氧烷磷酸酯
1.
Introduction to synthesis and application of polyether-modified polysiloxane phosphate;
聚醚改性硅氧烷磷酸酯的合成及应用
4) amino modified polyether polysiloxane
氨基改性聚醚型聚硅氧烷
1.
The results showed that the average molecular weight of methyl hydrogen silicone, amine structure and Si content in amino modified polyether polysiloxanes have some effects on A.
用含氢硅油、烯丙基缩水甘油醚、烯基聚醚的硅氢化加成产物—聚醚 /环氧硅油与胺反应制得了氨基改性聚醚型聚硅氧烷 (APEPS) ,对其结构与性能进行了表征和研究。
5) Si-C siloxane-oxyalkylene copolymer
Si-C型聚醚改性聚硅氧烷
1.
Synthesis of Si-C siloxane-oxyalkylene copolymer and study on its foam stability to soft polyurethane foam plastics;
Si-C型聚醚改性聚硅氧烷的合成及其匀泡性能研究
6) piperazine modified polyether polydimethylsiloxane
哌嗪改性聚醚基聚二甲基硅氧烷
补充资料：改性氯化聚醚
分子式：
CAS号：
性质： 通过共聚改善了某些性能的氯化聚醚。为了进一步提高氯化聚醚的耐热性，化学稳定性和机械强度，由3,3-双(氯甲基)丁氧环与其他单体共聚可制得多种改性氯化聚醚。如与甲醛或三氧六环的共聚物，耐热性和耐酸性优良；与2-甲基四氢呋喃或环氧氯丙烷制的共聚物，可以是塑料或弹性体；与低分子量环氧树脂制得的共聚物，具有高耐湿性、高强度和良好电性能；与甲基硅氧烷制得的共聚物，耐热性更好。
CAS号：
性质： 通过共聚改善了某些性能的氯化聚醚。为了进一步提高氯化聚醚的耐热性，化学稳定性和机械强度，由3,3-双(氯甲基)丁氧环与其他单体共聚可制得多种改性氯化聚醚。如与甲醛或三氧六环的共聚物，耐热性和耐酸性优良；与2-甲基四氢呋喃或环氧氯丙烷制的共聚物，可以是塑料或弹性体；与低分子量环氧树脂制得的共聚物，具有高耐湿性、高强度和良好电性能；与甲基硅氧烷制得的共聚物，耐热性更好。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条