说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 氮气油雾
1)  nitrogen-oil-mixture medium
氮气油雾
1.
Based on ‘Green Machining’, experimental work on high speed milling of hardened mould steel under nitrogen-oil-mixture medium, air-oil-mixture and dry milling has been done.
文中基于“绿色制造”理念,在干铣削、空气油雾、氮气油雾介质下进行了淬硬模具钢高速铣削的铣削力试验研究,分析了铣削力随铣削长度、铣削速度、径向进给、轴向进给及每齿进给的变化规律。
2)  nitrogen atomization
氮气雾化
1.
To the problem,the aluminum powder Nitrogen atomization process model based on RBF neural networks is presented,and enhanced GA based aluminum powder Nitrogen atomizing process optimial control is implemented to improve .
针对这一问题,以优化铝粉粒度分布为生产目标,提出了基于RBF神经网络建立铝粉氮气雾化生产过程模型,采用改进的遗传算法对雾化过程各控制量的设定值进行优化,根据工况条件的变化动态地设定各个控制环节的设定值使铝粉氮气雾化效果达到最佳,从而提高微细铝粉收率的优化控制方法。
2.
On the basis of analyzing the characteristics of aluminum powder nitrogen atomization and classification process and requirements for optimization control,a distributed control system based on industrial control PC,PLC and field bus I/O modules is presented to perform the integrated control of atomization and classification process.
在分析铝粉氮气雾化分级过程的特点和优化控制要求的基础上,设计了基于工控机和PLC以及现场I/O模块的分布式控制系统,实现了雾化和分级过程的集成控制。
3)  air-oil-mixture medium
空气油雾
4)  air atomization oil
空气雾化油
1.
High efficiency intcral mixing air atomization oil burner is researched and designed, Aiming at cold state experimental results, the effects of air and oil pressure on the torch shape and the relationship betwcen combustion energy, propellant consumption, fire pan and pulverization angle are discussed.
研究设计内混式高效空气雾化油燃烧器。
5)  aluminum powder nitrogen atomization
铝粉氮气雾化
1.
For aluminum powder nitrogen atomization process,it is very important to keep the temperature of the melting aluminum stabilizing in atomization furnace.
铝粉氮气雾化生产过程中,保持雾化炉铝液温度的稳定非常重要,但铝粉雾化炉是一个非线性、大滞后、不确定性系统,采用常规P ID控制器很难保证控制效果。
2.
Design and Application of the Aluminum Powder Nitrogen Atomization Automatic Control System;
本论文通过详细分析铝粉氮气雾化的现场工艺、控制要求和过程特点,采用先进的自动控制技术完成了铝粉氮气雾化综合自动化控制系统的设计,达到了对铝粉氮气雾化过程变量的实时检测,工艺流程的实时监控,过程参数的实时控制。
6)  Atomizing nitrogen pressure
氮气雾化压力
补充资料:皂化溶解油、肥皂油和调水油
分子式:
CAS号:

性质:又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂(如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂)和少量稳定剂(如乙醇或甲醇)而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主,润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条