1) water-assisted injection molding
水辅注射成型
1.
The origin,development,principle,molding equipment and technic methods of water-assisted injection molding technology are introduced.
介绍了水辅注射成型技术的起源、发展历程、基本原理、所需设备、工艺方法,并且把水辅注射成型技术与气辅注射成型技术进行了比较,总结出水辅注射成型技术方法的优缺点。
2) Water-assisted Injection Molding
水辅助注射成型
1.
Numerical Simulation for Flow Behavior of Fluids in Thin Cavity during Water-assisted Injection Molding Process;
板类制件水辅助注射成型流动过程的数值模拟研究
2.
The development history, the processing theory, molding methods of the water-assisted injection molding technology are introduced.
介绍了水辅助注射成型技术的发展、成型原理及成型的方法种类。
3.
According to the Hele-Shaw fluid model, a numerical simulation of a pipe for the effects of processing parameters in filling stage of water-assisted injection molding.
基于Hele-Shaw流动模型,对一直管的水辅助注射成型的充填过程的工艺参数的影响进行数值模拟。
3) water-assisted injection moulding
水辅助注射成型
1.
Numerical simulation on the packing process of water-assisted injection moulding;
水辅助注射成型保压过程的数值模拟研究
2.
The technological process and method of water-assisted injection moulding technology are inˉtroduced,and the principal features are deeply analyzed.
介绍了水辅助注射成型技术的工艺过程与方法 ,深入分析了水辅助注射成型的主要特点 ,比较了水辅助注射成型与气体辅助注射成型的主要差别 ,最后指出了水辅助注射成型技术的应用范围与前
4) water-assisted injection molding technology
水辅助注射成型技术
1.
The water-assisted injection molding technology was outlined,covering its origin,development,principle,advantages and disadvantages,forming method,application and existing problems.
对水辅助注射成型技术的起源、发展状况、加工原理、优缺点、成型方法、应用现状及存在的问题进行了简要介绍,并对水辅助成型技术的研究现状进行了论述;在实验研究中简要地对各实验方法和结论进行了总结,理论研究中分析了流动和冷却过程中采用的数值模拟方法及建立的数学模型,最后指出了水辅助注射成型技术需要解决的问题和继续研究的方向。
5) gas-assisted co-injection molding
气辅共注射成型
1.
Technology on tracking the moving interfaces in the numerical simulation of the filling stage of gas-assisted co-injection molding process;
气辅共注射成型充填过程数值模拟中的移动界面追踪技术
2.
Experimental investigation on gas-assisted co-injection molding process,an innovative plastic injection molding process,is conducted based on the improved equipments.
通过对现有注塑、气辅设备的改造,对气辅共注射成型工艺进行了实验研究。
6) gas-assisted injection molding
气辅注射成型
1.
On the basis of general Hele-Shaw moldel, the simulation of the effect of several important mold-ing process parameters on gas-assisted injection molding process was implemented by means of CAE technequein this paper which involves melt temperature, delay time ,prefilled polymer volume fraction and gas pressure.
本文基于Hele-Shaw模型,采用CAE技术,模拟了气辅注射成型中几个重要工艺参数:熔体温度、气体压力、延迟时间、熔体预注射量等对其成型的影响。
2.
Development of gas-assisted injection molding technology is summarized.
概述了传统气辅注射成型技术的发展 ,并详细介绍了气辅注射应用过程中的外部气辅注射、液辅注射等新技术。
3.
This article is put forward in such an circumstance,the purpose is having a research on the key technique of gas-assisted injection molding and processing parameters,which affect the gas finger at the inner wall of GAIM production.
利用Moldflow软件,对汽车结构件杂物箱进行气辅注射成型的工艺条件优化选择,经分析和讨论最终得出该制件气辅成型的最佳工艺参数为:熔体预注射量为95%,气体延迟时间为0。
补充资料：气辅注射成型技术
分子式：
CAS号：
性质：向注塑模熔体中注入惰性气体，并控制其内压的成型技术。该技术所得制品具有表面光洁，减少翘曲变形，降低锁模力等优点，适合成型大型制件。
CAS号：
性质：向注塑模熔体中注入惰性气体，并控制其内压的成型技术。该技术所得制品具有表面光洁，减少翘曲变形，降低锁模力等优点，适合成型大型制件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条