1) phenolic molding compounds
酚醛模塑料
1.
According to the technological requirements of post-curing of phenolic molding compounds for automobile starter commutator,it is proposed to realize the specific programs of the control system.
根据汽车起动机换向器酚醛模塑料后固化工艺要求,提出控制系统的具体实现方案。
2.
In this paper, the preparation, structures and properties of phenolic molding compounds reinforced with sisal fiber (SF) and sisal-glass (GF) hybrid fibers were studied systematically.
本文研究了剑麻纤维(SF)及剑麻-玻纤(GF)混杂纤维增强酚醛模塑料的制备工艺、结构形态及性能。
3.
Influences of surface treatments on SF,and content of SF on the properties of phenolic molding compounds were studied.
采用剑麻纤维(SF)作增强填料,辅以其它助剂,与酚醛树脂(PF)混合、辊炼、粉碎制备酚醛模塑料。
2) phenolic moulding compound
酚醛模塑料
1.
By taking combination of self-made phenolic compound with enforcement materials-fiberglass,phenolic moulding compound which can be injected are made.
采用一种自制的苯酚甲醛树脂和复合固化体系,以无机玻璃纤维为增强材料,得到了一种可以注射成型的酚醛模塑料。
3) phenolic molding compound
酚醛模塑料
1.
Application of Brabender rheometer in evaluation of the processability of phenolic molding compound;
流变仪在酚醛模塑料加工性能评价中的应用
2.
The high-temperature resistance of a phenolic molding compound based on a phenolic resin reinforced with glass fiber was studied.
采用一种自制的苯酚甲醛树脂和复合固化体系 ,以无机玻璃纤维为增强材料 ,得到一种可注射成型的酚醛模塑料 ,对其耐高温性能进行了研究。
4) phenolic sheet molding compound
酚醛片状模塑料
1.
The thickening technique of phenolic sheet molding compound and its thickening mechanism were studied in this paper.
研究了新型酚醛片状模塑料（Ｐ－ＳＭＣ）的增稠技术及增稠机理。
2.
The thickening agent of phenolic sheet molding compound and its thickening mechanism were studied in this paper.
本文通过粘度实验，研究了酚醛片状模塑料（Ｐ－ＳＭＣ）的新型增稠剂。
6) phenolic molding resin
酚醛模压塑料
1.
The paper introduce the technology of molded commutators manufacturing, the importance of glass liber reinforced phenolic molding resin for the molded commutators and the difference of the performance between such resin from Japan and China.
简要地介绍了模压法制造电机换向器的技术,介绍了玻璃纤维增强酚醛模压塑料是制造电机换向器的关键材料,分析对比了国内外玻璃纤维增强酚醛模压塑料的性能,提出了对电机换向器用模压塑料的若干看法。
补充资料：酚醛模塑粉
分子式：
CAS号：
性质： 将热塑性或热固性酚醛树脂经粉碎后按一定比例与有机填料(如木粉、棉纤维、碎布等)、无机填料(如石棉、云母、石英粉、玻璃纤维等)、硬化剂(六亚甲基四胺等)、润滑剂、着色剂等混合均匀，再经热压成片、冷却、粉碎而成。
CAS号：
性质： 将热塑性或热固性酚醛树脂经粉碎后按一定比例与有机填料(如木粉、棉纤维、碎布等)、无机填料(如石棉、云母、石英粉、玻璃纤维等)、硬化剂(六亚甲基四胺等)、润滑剂、着色剂等混合均匀，再经热压成片、冷却、粉碎而成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条