1) Fe-Cr-B alloys
Fe-Cr-B合金
1.
Observation of 1~# rare earth modified morphologies of M_2B borides in the micro-structures of Fe-Cr-B alloys
1~#稀土变质处理Fe-Cr-B合金组织中硼化物M_2B组织形态的分析
2) Ni Cr Fe Si B alloy
Ni-Cr-Fe-Si-B合金
3) Fe-Ni-Cr-B-Si alloy
Fe-Ni-Cr-B-Si合金
1.
Laser cladding of Fe-Ni-Cr-B-Si alloy on AZ91D magnesium alloy was achieved by using a two-step method, i.
本文采用通过火焰热喷涂与激光重熔二步法工艺在AZ91D镁合金表面成功熔覆了Fe-Ni-Cr-B-Si合金,制备出了耐磨和耐蚀的平整合金涂层。
4) Fe-Cr alloy
Fe-Cr合金
1.
Thermogravimetric studies have been conducted on the corrosion behavior of Fe-Cr alloyscoated with NaCl deposit in air colltaining Water vaPor at 600 t.
用热重分析法研究了在600℃表面未涂或涂有NaCl膜的情况下，Fe－Cr合金在空气或空气＋水蒸气中的腐蚀行为。
2.
Based on the study of the properties of several laterally-welded bimetal spring laminations and arc zones, it has been found that Fe-Cr alloy can be used to replace Ni50 alloy as a low expansion componenet in a laterally-welded bimetal spring lamination due to its similar performance.
本文结合用户对产品的需求,在对多种横拼双金属焊带及弹簧片的温度补偿性能进行研究后,采用Fe-Cr合金替代Ni50合金作为低膨胀组元,制作低补偿量横拼双金属弹簧片,其性能与Ni50型横拼双金属弹簧片相当,产品已通过了用户单位的五步认定,成功用于生产性装管。
3.
Fe-Cr alloys with two different Cr content,9% Cr and 19% Cr,were shot blasted and then oxidized at 600℃～770℃ in water vapor.
研究了表面处理喷丸对Cr含量为9 mass%和19 mass%的Fe-Cr合金在通过600℃~770℃温度区间高温水蒸气氧化行为的影响。
5) Cr-Fe alloy
Cr-Fe合金
1.
The electrodepositing Cr-Fe alloy coating was studied in the chloride system of trivalent chromium and bivalent iron.
本文研究了从三价铬和二价铁的氯化物体系中电沉积Cr-Fe合金镀层，利用该工艺获得了较好的Cr-Fe合金镀层。
6) Ni-Fe-Cr-B-Si alloy coating
Ni-Fe-Cr-B-Si合金涂层
补充资料：Au-Pd-Cr-Pt-Fe-Al-Y alloys
分子式：
CAS号：
性质：金基与钯、铬、铂、铁、铝和钇的多元合金，电阻系数最高。生产方法参见金钯铬合金。可用作高温应变材料。
CAS号：
性质：金基与钯、铬、铂、铁、铝和钇的多元合金，电阻系数最高。生产方法参见金钯铬合金。可用作高温应变材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条