1) liquid ceramic
液体陶瓷
1.
The melting treatment of MWSI fly ash was performed at a batch-melting furnace with two types of additives, CaO and liquid ceramic (LC), at different melting temperatures, melting atmospheres and treatment times.
为了研究添加剂对垃圾飞灰熔融处理过程中二分解特性的影响 ,选择碱性氧化物CaO和液体陶瓷 (LC) 2种添加剂 ,改变温度、气氛和熔融时间研究 2种添加剂对二分解率的影响 。
2) solution ceramic
溶液陶瓷
3) Ceramic powder
陶瓷粉体
1.
The effect of hydrothermal method on properties of ceramic powders;
水热法工艺对合成陶瓷粉体性能的影响
2.
Synthesis of Ba_(0.7)Sr_(0.3)TiO_3 ceramic powder by complex precursor route;
络合溶胶-凝胶法制备Ba_(0.7)Sr_(0.3)TiO_3陶瓷粉体
3.
Synthesis of (1-x)Ca_(0.4)Sm_(0.4)TiO_(3-x)Li_(0.5)Nd_(0.5)TiO_3 ceramic powder by EDTA precursor;
EDTA络合法合成CSLNT陶瓷粉体
4) ceramic carrier
陶瓷载体
1.
The light ceramic carrier was used for biofilm carrier in turn it entered into better fluidization reactor to treat organic wastewater, and fluidized well under small aeration.
选用轻质粘土、硅藻土和蛭石等陶瓷原料,按一定比例进行配方和制作,研制成一种轻质生物膜陶瓷载体,比重仅有1。
5) ceramic powders
陶瓷粉体
1.
Study on the preparation of ceramic powders of ternary pyrochlor containing bismuth by coprecipitation;
共沉淀法制备三元系铋基焦绿石型陶瓷粉体
2.
The development trends of ZnO varistor ceramic powders;
氧化锌压敏陶瓷粉体的研究进展
3.
Oxidation behavior of polymer derived SiCO ceramic powders
先驱体转化法制备SiCO陶瓷粉体的氧化性能
6) ceramic body
陶瓷坯体
1.
This paper introduces the prescription design of the ceramic body with the lower sintering temperature.
通过对水玻璃、废玻璃和三聚磷酸钠进行物理、化学性质分析,利用废玻璃代替部分水玻璃进行低温陶瓷坯体配方设计,获得性能较好且烧成温度为860oC左右的低温陶瓷坯体。
补充资料：电解质陶瓷(见快离子导体陶瓷)
电解质陶瓷(见快离子导体陶瓷)
electrolyte ceramics
电解质陶瓷electrolyte陶瓷。Cera』n1CS即快离子导体
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条