1) natural rubber
NR
1.
Effects of praseodymium O,O′-dioctyldithiophosphate(PrDODP) on the curing characteristics and vulcanization kinetics of natural rubber(NR) were investigated.
将O,O′-二辛基二硫代磷酸镨(PrDODP)用作天然橡胶(NR)硫黄硫化的促进剂。
2.
Calcium oxide, carbon dioxide and nature rubber latex were selected as main raw materials, and the preparation technology of nanometer calcium carbonate was combined with that of natural rubber.
采用CaO、CO2和天然胶乳等为主要原料,将纳米CaCO3的制备工艺和NR的制备工艺相结合,在可控反应条件下先将Ca(OH)2与CO2反应制备纳米CaCO3乳液再与天然胶乳共混、共凝制备纳米CaCO3/NR复合材料。
3.
In this paper,effects of conventional cure system(CV),effective cure system(EV),semi-effective cure system(SEV),equivalent cure system(EC) on the physical-mechanical properties and cure reversion resistance of cured natural rubber were studied.
研究了普通(CV)、有效(EV)、半有效(SEV)和平衡(EC)四种硫化体系对NR抗硫化返原和硫化胶物理机械性能的影响。
2) Al 2O 3/NR
Al2O3-NR
3) NR powder
NR粉
1.
Fly ash, silica fume and nano-fiber materials-active NR powder were employed to incorporate into the cement-based materials.
将粉煤灰、硅灰和纳米纤维材料一活性NR粉应用于水泥基材料中,依据最大密实度理论和微粒级配数学模型设计出水泥基材料,研究了水泥基材料中二级界面对其性能的影响。
4) NR code
NR码
1.
Propose an equalization algorithm combined with NR code, which prompt the receiver’s perform
提出了一种和NR码结合的均衡算法,提高了高速移动的动态信道下系统的性能和稳定性。
5) powdered NR
粉末NR
1.
Mastication conditions of black N330-filled powdered NR using internal mixer;
炭黑N330填充型粉末NR密炼机塑炼工艺的研究
6) NR latex
NR胶乳
1.
Thermal degradation kinetics of LPNR latex and NR latex;
LPNR胶乳和NR胶乳热降解性能的研究
2.
A modified kaolinite/NR composite was prepared by coacervation-coprecipitation of concentrated NR latex with modified kaolinite and the influence of the preparation conditions on the mechanical properties of vulcanizate was investigated.
以浓缩NR胶乳为主体材料,改性高岭土为填料,用凝聚共沉法制备改性高岭土/NR复合材料,研究影响复合材料物理性能的因素,并对材料拉伸断裂面的形貌进行扫描电镜分析。
3.
A NR/Kaolin composite was prepared by coagulation/coprecipitation of NR latex and Kaolin slurry.
通过NR胶乳与高岭土悬浮液混合以凝聚共沉法制备填充型NR ,并研究高岭土的结构、平均粒径和填充量等对其硫化胶力学性能的影响。
补充资料：LS-NR
分子式：
CAS号：
性质： 用喷雾干燥器将胶乳用高速离心转盘分散雾化，使之从干燥塔顶徐徐降下，与从塔底部上升的干燥空气接触而立即脱水干燥成为细粒橡胶。由胶乳经喷雾干燥成橡胶细粒而后压制成片的橡胶叫作胶乳喷雾橡胶或全胶乳橡胶。该橡胶含所有胶清成分。生胶硫化速度快于传统凝固法生产的橡胶。
CAS号：
性质： 用喷雾干燥器将胶乳用高速离心转盘分散雾化，使之从干燥塔顶徐徐降下，与从塔底部上升的干燥空气接触而立即脱水干燥成为细粒橡胶。由胶乳经喷雾干燥成橡胶细粒而后压制成片的橡胶叫作胶乳喷雾橡胶或全胶乳橡胶。该橡胶含所有胶清成分。生胶硫化速度快于传统凝固法生产的橡胶。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条