1) inner transversal crack
内横裂
1.
The causes of inner transversal crack of cold-draw heavy wall pipe of 45 steel were analyzed.
通过提高管坯质量和改进拉拔、中间退火工艺,使厚壁管内横裂缺陷基本消除。
2) Inner Cross Crack
内部横裂纹
1.
Analysis on Forming Mechanism of Inner Cross Crack in Concasting Thin Slab Produced by FTSR Process;
FTSR薄板坯内部横裂纹形成机理的分析和预防措施
3) transverse crack
横裂
1.
The reason for transverse crack in continuous-casting slab is analyzed,some treasures proposed.
分析了临钢板坯连铸机板坯产生横裂纹的原因,找出了消除板坯产生横裂的处理措施。
2.
Through an analysis of the material, microstructure, spheroidization mechanizm and the process of spheroidizing techniqe,a conclusion can be drawn that non uniform furnace temperature and lower local heating temperature lead to the abnormal structure speroidization underheated structure,which in turn results in transverse crack under the complex stresses in cold drawing.
通过材质分析、金相组织分析、球化机理的探讨及对球化工艺过程的追溯 ,得出GCr15轴承钢管冷拔产生横裂的主要原因是由于炉温不均、局部加热温度偏低而产生的球化退火欠热型反常组织在冷拔过程的复杂应力作用下产生裂纹所致。
3.
Because Nb is a crack-sensitive element, the transverse cracking rate of the Nb containing slab is far greater than that of other steel grade.
为降低生产成本,济钢第一炼钢厂方坯铸机以铌铁代替钒铁生产HRB400等含铌钢种,由于铌为裂纹敏感性元素,其铸坯横裂纹发生率远远大于其它钢种。
4) transversal crack
横裂
1.
The form at transversal crack defect of cold draw pipe was briefly described,the forming causes and influence factor of transversal crack was analyzed and the concerned preventive measures was provided.
概述了冷拔管横裂缺陷的形式,分析了横裂缺陷产生的原因及影响因素,并提出了相应的预防措施。
5) Cross cracks
横裂
1.
In 1999,the cross cracks occruued frequenty in CC slabs cast in our plant,and brought a serious influence to slabs quality.
1999年,临钢板坯连铸生产中频繁出现横裂纹,严重影响了铸坯质量。
6) horizontal cleavage
横裂;纬裂
补充资料：横裂
transversecrack：垂直于炭化室内热流方向的焦炭裂纹。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条