1) Crystallization onset temperature
结晶起始温度
1.
There is a distinct increase of 10～15 ℃ in crystallization onset temperature and crystallization peak temperature compared with pure IPP.
成核后等规聚丙烯的结晶起始温度和结晶温度均提高 10～ 15℃ ,同时等规聚丙烯结晶度增加 ,晶粒细微化。
2) point of incipient sintering,temperature of beginning sintering
起始烧结温度<冶>
3) initial freezing temperature
起始冻结温度
1.
Using the method of thermometry,the initial freezing temperature of samples is obtained which are from permafrost regions in Da Hinggang Ling Mountain.
采用测温法对取自大兴安岭多年冻土区冻土土样进行了起始冻结温度试验。
4) initial temperature
起始温度
1.
This paper proposes that the initial temperature T i of gear is rising gradually during laser scanning tooth by tooth.
提出了齿轮激光淬火逐齿扫描时每个轮齿的“起始温度Ti”的渐变性。
2.
The impact of the initial temperature on the measurement results was also discussed.
文章通过依据不同标准所规定的测试方法进行塑料热变形温度(HDT)测量,找出测量结果之间的规律;同时研究了测量热变形温度过程中使用的硅油的黏度对测量结果的影响,提出更换硅油频率的建议;还探讨了测量起始温度对测量结果的影响。
5) preliminary austenite grain size
起始晶粒度
6) crystallization temperature
结晶温度
1.
Crystallization Temperature of CaO-SiO_2-Na_2O-CaF_2-Al_2O_3-MgO;
CaO-SiO_2-Na_2O-CaF_2-Al_2O_3-MgO渣系的结晶温度
2.
The effect of crystallization temperatures(100 ℃~140 ℃) on the production of β crystal form in isotactic polypropylene nucleated by pimelic acid,magnesium pimelate and aluminium pimelate respectively had been studied in this paper.
研究了结晶温度(100℃~140℃)对庚二酸、庚二酸镁、庚二酸铝成核等规聚丙烯中β晶型生成的影响。
3.
The effects of R,Na2CO3 content,CaF2 content,Al2O3 content and MgO content on crystallization temperature were determined.
利用差热分析仪,研究连铸保护渣的结晶温度与碱度、Na2CO3含量、CaF2含量、Al2O3含量和MgO含量之间的关系,进而通过建立非线性规划模型,对连铸保护渣的结晶性能进行优化设计和模型预测。
补充资料：番茄萎蔫素[肽]结晶、分解温度227～229℃
分子式：
CAS号：
性质：又称番茄萎蔫素[肽]结晶、分解温度227～229℃。旋光度-42°～48°(在pH值7.0水中)。易溶于稀酸和稀碱中，微溶于水。可从霉菌番茄镰孢菌(Fusarium lycopersici)中提取。系抗生活性肽。
CAS号：
性质：又称番茄萎蔫素[肽]结晶、分解温度227～229℃。旋光度-42°～48°(在pH值7.0水中)。易溶于稀酸和稀碱中，微溶于水。可从霉菌番茄镰孢菌(Fusarium lycopersici)中提取。系抗生活性肽。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条