1) gasification agent
气化剂
1.
Effect of gasification agent on performance of entrained flow coal gasifier
气化剂对气流床煤气化炉性能的影响
2.
The stable operation condition and gist of optimize d process under high gasification load condition of coal gasifier were presented from aspects of carbon layer, ash layer, gasification agent and production operation; and the appropriate solvable measures were also presented.
从炭层、灰层、气化剂和生产操作方面提出了煤气炉在高气化强度条件下稳定工况和优化工艺的要领,提出了相应的解决措施。
3.
Based on calculation of vapor amount in gasification agent,such factors as atmospheric pressure,bottom air pressure,saturated temperature as well as original wet air temperature which may affect the vapor amount in the gasification agent are studied in this paper.
通过对气化剂中水蒸气供给量的计算,分析了大气压、炉底鼓风压力、饱和温度和原始湿空气温度等对气化剂中水蒸气供给量的影响:指出气化剂中水蒸气供给量随大气压和原始湿空气温度的增大而降低,随饱和温度的提高而增大,炉底鼓风压力、原始湿空气湿度及外界供应饱和水蒸气温度等,虽然对气化剂中水蒸气供给量有一定的影响,但就常压固定床煤气发生炉而言影响较小,可以忽略不计。
2) gasifying agent
气化剂
1.
The analysis was used to study the effect of gasifying agent mixing .
通过化学平衡和热量平衡方法求解气化炉平衡工作温度以及该温度下的出口煤气成分 ,研究了气化炉进口气化剂配比对出口煤气成分、冷煤气效率、热效率及火用效率的影响 ,指出热效率、火用效率最优情况下适应于各煤种的最优氧煤比以及合理的水蒸气耗量 ,为多联产系统的设计优化提供参
2.
The rice husk powder,rice husk,corn stalk powder were used for gasification experiments and river sand was used as bed material in CFB,and the air was used as gasifying agent.
在原有单循环流化床条件下,以稻壳粉、稻壳、玉米秸粉,三种生物质为原料:以河砂为试验装置床料;以空气为气化剂,进行生物质气化工艺试验。
3) gas catalyzer
气体催化剂
4) Chemical Agent for Gas Production
采气化学剂
5) temperature of gasification agent
气化剂温度
6) High temperature gasifying agent
高温气化剂
1.
High temperature gasifying agent gasification of coal was performed in a 0.
1MW的小型加压喷动流化床试验装置上进行了高温气化剂煤气化特性的试验研究,考察了气化温度、压力、空气系数和汽煤质量比等工艺参数对高温空气/蒸汽作为气化介质的煤气化行为的影响。
补充资料：8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601
分子式：
CAS号：
性质：又称8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601或7601自交型黏合剂T/C。外观为带蓝色荧光的白色乳液。pH值5～6。含固量38%～40%。主要成分是丙烯酸丁酯、丙烯腈和N-羟甲基丙烯酰胺的共聚物。适用于棉及涤/棉混纺织物的涂料印花，高温熔烘(180℃下，15min)不泛黄。
CAS号：
性质：又称8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601或7601自交型黏合剂T/C。外观为带蓝色荧光的白色乳液。pH值5～6。含固量38%～40%。主要成分是丙烯酸丁酯、丙烯腈和N-羟甲基丙烯酰胺的共聚物。适用于棉及涤/棉混纺织物的涂料印花，高温熔烘(180℃下，15min)不泛黄。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条