1) Weakly alkaline medium
弱碱性介质
2) weak alkaline medium
弱碱介质
3) Alkaline medium
碱性介质
1.
Electrochemical behaviors of thiourea in alkaline medium;
硫脲在碱性介质中的电化学行为
2.
Their stability of etherbond in the alkaline medium was studied.
设计合成了一系列的邻硝基芳香醚,对碱性介质中芳醚键的稳定性进行了研究。
3.
A series ramification of aryl ethers that containing strong electrowithdrawing group (-NO2) have been synthesized, which were used as the studied substrate and the stability of aryl etherbond in the alkaline medium has been researched.
本文选用硝基作为强吸电子基团，设计合成了一系列的芳醚衍生物作为研究对象，考察了它们的芳醚键在碱性介质中的稳定性情况。
4) alkali medium
碱性介质
1.
Electrochemical polymerization of p-phenylenediamine on Pt microelectrode in alkali medium;
碱性介质中对苯二胺在铂微电极上的电化学聚合研究
2.
A study on alkali medium in the technology of pretreatment of refractory gold ores by alkaline hot-press oxidation;
某难选冶金矿石压热氧化预处理工艺的碱性介质研究
3.
Determining trace Se in pyrite by using hydride atomic fluorescence spectroscopy in the alkali medium;
碱性介质氢化物发生原子荧光光谱法测定黄铁矿中痕量硒
5) alkaline solution
碱性介质
1.
Sulfide has the active effect on the oxidization of potassium iodide by hydrogen per-oxide in alkaline solution, This kinetic system may be coupled to chemiluminescence reaction of Lu-minol and applied to determine trace of S￣(2-).
本文发现，在碱性介质中，硫（Ⅱ）能增大过氧化氢和碘化物之间的反应速度。
2.
The corrosion properties of rolled ZK60 alloy treated at different aging states in Cl-alkaline solution were studied by SEM,EDS,XRD,weight-loss tests and electrochemistry tests.
通过扫描电镜、能谱分析、X射线衍射分析以及静态失重法、电化学测试等手段,研究了不同时效状态下商用变形ZK60合金在含Cl-的碱性介质中的腐蚀性能。
6) Alkaline media
碱性介质
1.
The adsorption and oxidation of methanol on Pt electrode in alkaline media have been investi-gated by using cyclic voltammetry, electrochemical quartz crystal microbalance (EQCM) and in-situ reflec-tance FTIR spectroscopy.
运用电化学循环伏安、原位FTIR反射光谱和石英晶体微天平(EQCM)等方法研究了碱性介质中甲醇在Pt电极表面吸附和氧化行为。
补充资料：弱碱性丙烯酸系阳离子交换树脂
分子式：
CAS号：
性质：弱碱性丙烯酸系阴离子交换树脂有凝胶型和大孔型两种。凝胶型树脂是由丙烯酸甲酯与二乙烯苯进行悬浮共聚，再用多烯多胺胺化而得。大孔型树脂的制法与凝胶型基本相似，不同之处是在悬浮共聚时加入一定量的致孔剂。主要用于水处理、稀有元素的提取，还可用于脱色及处理含有机物的溶液。
CAS号：
性质：弱碱性丙烯酸系阴离子交换树脂有凝胶型和大孔型两种。凝胶型树脂是由丙烯酸甲酯与二乙烯苯进行悬浮共聚，再用多烯多胺胺化而得。大孔型树脂的制法与凝胶型基本相似，不同之处是在悬浮共聚时加入一定量的致孔剂。主要用于水处理、稀有元素的提取，还可用于脱色及处理含有机物的溶液。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条