1) Deviations of temperature-controlling

控温偏差
2) Temperature deviation

温度偏差
1.
As the theoretical research shows that the relative error of the sensitivity of the piezoresistive micro-accelerometer increases with the increase of temperature deviations, which is -4.
理论研究结果表明,压阻式微加速度计灵敏度的相对误差随着温度偏差绝对值的增大而增大;其中灵敏度误差在温度偏差为+20℃时达到-4。
2.
It is pointed out that minimizing the temperature deviation along boiler width of superheater and reheater panels by using online monitor system is a important measure to avoid these trouble.
针对我国超临界和亚临界大容量锅炉过热器再热器的超温爆管及管内氧化垢事故,用电厂实例综述了发生这些事故在运行和设计两方面的因素,指出在运行中减小过热器再热器管组沿宽度的温度偏差是避免这种事故的重要手段。
3) wall temperature excursion

壁温偏差
1.
Research on the water wall temperature excursion in the supercritical and ultra supercritical boilers;
超临界及超超临界锅炉水冷壁壁温偏差研究
4) flue gas temperature difference

烟温偏差
1.
Applying 3D swing burner to reduce flue gas temperature difference of furnace outlets;

应用三维摆动燃烧器改善炉膛出口烟温偏差的实践
2.
Discussing the cause of flue gas temperature difference at furnace outlet in 4 corners tangentially coal fired boilers and proposing measures to eliminate such difference.
讨论了四角切圆燃烧锅炉炉膛出口烟温偏差的原因,提出了消除偏差措施的设想。
5) flue gas temperature deviation

烟温偏差
1.
some measures of reducing flue gas temperature deviation are introduced based on the ne.

针对大型四角切向燃煤锅炉炉膛出口烟温偏差问题,本文首次提出锅炉炉膛上部容积热负荷概念,在系统分析及可靠的运行数据基础上,相对600MW、300MW、200MW机组锅炉,分别给出了炉膛上部容积热强度的上限值,即:0。
2.
Based on the reason why the flue gas temperature deviation is occurred in a corner firing boiler and the practical boiler operating parameters, the measure to reduce the deviation by shifting down the position of tertiary air is proposed.
基于四角切向燃烧锅炉烟温偏差产生的原因和锅炉实际运行参数 ,提出了将三次风下移来降低大型锅炉燃烧过程中烟温偏差的方法 ,对汉川电厂 3 0 0 MW机组锅炉的热力计算结果说明 ,三次风下移后不会对燃烧稳定性及结渣性产生不良影响 。
6) bed temperature deviation

床温偏差
1.
Through analysis on the problems of the engine s cutting out, partial agglomeration, bed temperature deviation, and lower duty ratio, etc.
4—M21循环流化床锅炉投产后出现的灭火、局部结焦、床温偏差、负荷率低等问题进行的分析,针对锅炉在运行方式、设备维护、设备状况等方面存在的缺陷和不足,提出了合理的解决办法和建议。
补充资料:可控性与非可控性投入
可控性与非可控性投入
可控性与非可控性投人可控性投入指学校和教育行政部门可以控制的教育资源投入。学校可以对教学负担、班级规模、课程教学单元的数量、每个教师承担的学科教学任务的平均量等可控性投入进行调节和平衡,以改进教学质量。教育行政部门可以对教师的专业准备程度、教学经验、培训要求、教师工资、设备供应、生活费用、图书馆藏书等投入进行选择,以调节教育的供给与需求。而非可控性投入指学校和教育行政部门不能控制的教育资源投入。如学生的种族、性别、年龄及家长的社会经济背景等无法控制的因素对教育有着不同程度的影响。教育部门不能控制学生家长的教育水平和收入状况,但应当推动教育机会平等的社会经济环境的实现。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条