1) TIG remelting
TIG重熔
1.
Affection of TIG remelting welding seam process on the residual stress in weld area;
TIG重熔工艺对焊缝区残余应力的影响
2) TIG surface remelting process
TIG表面重熔
1.
Compared with the conventional post grinding process for the weld layer,the effect of TIG surface remelting process on cavitation erosion resistance was investigated.
用氩弧熔化焊(M IG)在4020碳钢表面堆焊耐空泡腐蚀材料,然后采用TIG(钨极氩弧焊),将堆焊层改性;通过与传统磨削表面加工对比,研究了TIG表面重熔对空泡腐蚀的影响。
2.
Compared with grinding process,the effect of TIG surface remelting process on cavitation corrosion resistance was investigated.
采用TIG(钨极氩弧焊)表面重熔工艺对耐空泡腐蚀堆焊材料进行改性加工,与磨削表面加工对比研究了TIG表面重熔对空泡腐蚀的影响。
3.
Compared with grinding process,the effect of TIG surface remelting process to cavitation erosion resistance was investigated.
采用TIG(钨极惰性气体保护焊)表面重熔工艺对表面耐空泡腐蚀堆焊材料进行改性加工,与磨削表面加工对比研究了TIG表面重熔对空泡腐蚀的影响。
3) TIG remelting technique
TIG重熔技术
4) weld toe TIG remelting
焊趾TIG重熔
5) TIG dressing
TIG熔修
1.
Using the cantilever bending fatigue test,the fatigue life of the 10Ni5CrMoV steel welded joints with and without TIG dressing on the toe was compared at the same loading condition,and the stress field and strain field of welded joints were calculated by the finite element method.
采用悬臂弯曲疲劳试验方法比较了相同加载条件下焊趾TIG熔修与否的10Ni5CrMoV钢焊接接头的疲劳寿命,并对焊趾TIG熔修与否的焊接接头在加载条件下的应力应变场进行了有限元计算。
2.
At present, method using TIG dressing technique to treat weld structure with defects and to improve fatigue strength has not been reported yet at home.
结合国产16Mn低合金中强钢,用TIG熔修法提高含咬边缺陷焊接接头疲劳强度,并延长其疲劳寿命。
3.
It is very necessary to compare the ultrasonic peening method with the TIG dressing method, because the latter is used widely.
采用Q2 35B十字接头试件 ,就改善焊接接头疲劳强度的超声冲击法与TIG熔修法进行了全面对比。
6) TIG-dressing
TIG熔修
1.
The Study of Weleling Joints Fatigue Strength Improued by TIG-dressing;
TIG熔修提高焊接接头疲劳强度的研究
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条