1) compound modifying agent

晶型转化剂
2) crystal phase transformation

晶型转化
1.
The required crystal phase of these ferrites is obtained through the following process:doping,control of air and temperature,activation of the raw material,and the crystal phase transformation.
以炼钢烟尘为原料制作永磁钡铁氧体,通过掺杂改善制备中的固相反应;通过控制气氛与温度控制物料间的相反应;通过对原料的活化和晶型转化使形成永磁钡铁氧体所需要的晶型。
3) polymorphic transformation

多晶型转化
4) crystal modifier

转晶剂
1.
It also investigate different factors related to properties,such as the category of gypsum,the technology and the quantity of crystal modifier.
使用蒸压法和水热合成法制备高强石膏材料,通过正交试验确定了蒸压法制备高强石膏的工艺,探讨了不同石膏品种、不同制备工艺、转晶剂的加入量对高强石膏性能的影响。
2.
The influence of crystal modifier on strength of α-hemihydrates gypsum prepared by desulfurization gypsum is investigated.
目的探讨脱硫石膏浆体制备α-半水石膏时转晶剂对其形貌及强度的影响。
5) supported amorphous catalyst

负载型非晶态催化剂
6) phase transformation

晶型转变
1.
Crystallization and phase transformation characters of two groups of BAS glass-ceramics with and without ZrO_2 were investi- gated by differential scanning calorimetry (DSC),X-ray diffraction (XRD) and dilatometry.
用烧结法制备了化学计量比和高Ba含量的两组BaO-Al_2O_3-SiO_2(BAS)系微晶玻璃,采用差示扫描量热法(DSC)和X射线衍射分析(XRD)等手段研究了ZrO_2对BAS系微晶玻璃中六方钡长石析晶和六方钡长石向单斜钡长石晶型转变的影响。
2.
The crystallization and phase transformation characteristics of BAS glass-ceramics doped with different ZrO2 contents were investigated by differential scanning calorimetry, X-ray diffraction, according to the isoconversional method of Ozawa and the Johnson-Mehl-Avrami equation.
制备了不同ZrO2含量的BaO–Al2O3–SiO2(BAS)系微晶玻璃,用差示扫描量热法和X射线衍射分析,根据Ozawa等转化率法和等温转变动力学研究了ZrO2含量对BAS系微晶玻璃析晶和晶型转变的影响。
3.
The phase transformation of TiO 2 and the effect of composite mode of SnO 2 on phase transformation of TiO 2 have been investigated by TG-DTA and XRD.
本文研究了以硫酸氧钛 (TiOSO4·nH2 O)和氯化亚锡 (SnCl2 ·2H2 O)为原料 ,TiO2 和SnO2 以不同方式复合时SnO2 对TiO2 晶型转变的影响。
补充资料:8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601
分子式:
CAS号:
性质:又称8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601或7601自交型黏合剂T/C。外观为带蓝色荧光的白色乳液。pH值5~6。含固量38%~40%。主要成分是丙烯酸丁酯、丙烯腈和N-羟甲基丙烯酰胺的共聚物。适用于棉及涤/棉混纺织物的涂料印花,高温熔烘(180℃下,15min)不泛黄。
CAS号:
性质:又称8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601或7601自交型黏合剂T/C。外观为带蓝色荧光的白色乳液。pH值5~6。含固量38%~40%。主要成分是丙烯酸丁酯、丙烯腈和N-羟甲基丙烯酰胺的共聚物。适用于棉及涤/棉混纺织物的涂料印花,高温熔烘(180℃下,15min)不泛黄。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条