1) thickness strain
厚度应变
1.
It is thereby shown that both the spinning force p and the deformation characteristics of the whole spinning process are changed by the different shape of the roller because of its larger influence on the thickness strains,and hence results in the occurrence of the fracture on the differ.
研究结果表明 ,不同的旋轮形状不仅改变了旋压力p的大小 ,并且由于其对厚度应变ε的分布影响较大而造成整个旋压过程变形特征的改变 ,从而导致在工件的不同部位产生破
2) thickness effect
厚度效应
1.
The macro-results show that the thickness effects are dependent on the test temperature.
宏观结果表明，厚度效应表现出与温度的相关件：1000℃时，试样越薄，屈服强度越高；950℃以下,试样越厚，屈服强度越高。
2.
The dynamical thickness effect—formula of characteristic time,the relation between sensitirity Sn and film thickness,the existence optimum film thickness;the characteristics of conductance activity energy that varies with film thickness were given.
给出了动态厚度效应特征时间的公式,灵敏度Sn与膜厚l的关系和存在最佳膜厚的特征,电导激活能随膜厚变化的特征。
3.
Objective To theoretically analyze the thickness effect of a LiF detector for proton measurement.
目的分析氟化锂（ＬｉＦ） 探测器在测量质子时的厚度效应。
3) variable thickness
变厚度
1.
Generalized differential quadrature mathod for vibration analysis of annular plates with variable thickness;
用广义微分求积法分析变厚度圆板的自由振动
2.
The analysis for free vibration of ring-stiffened circular cylindrical shell with variable thickness was presented.
分析了环肋变厚度圆柱壳的自振特性。
3.
With cubic B-spline function taken as trial function,the solution of nonlinear stability of a revolving shallow shell with arbitrarily variable thickness was obtained by the method of point collocation in order to solve the convergence of a shallow shell with big rise.
为解决计算矢高特大的扁壳的收敛问题,以三次B样条函数为试函数,用配点法计算了任意变厚度的旋转扁薄壳的非线性稳定。
4) thickness change
厚度变化
1.
3mm/s,the systematic analysis of the thickness change and forming rule for the simulation process of the blank is done.
结果表明,凸模圆角部分是整个拉深件强度最薄弱的地方,减薄最大,是破裂危险区;凹模圆角部分容易发生破裂和起皱;法兰部分通常会发生增厚现象,同时是容易起皱的区域;筒底部分和侧壁部分在成形过程中厚度变化不大。
2.
Influence of thickness change of asphalt pavement and base on main value index is analyzed in this paper.
本文采用正交有限元的方法,分析了沥青面层和基层的厚度变化对考察指标的影响,从而得出了高模量沥青混凝土路面的合理结构,对相关的沥青路面设计提供了一个新的分析方法。
3.
The seam thickness change is one of the main factors effected on coal mining.
煤层厚度变化是影响煤矿开采的主要因素之一。
5) thickness variation
厚度变化
1.
The structural deformation is the principal geological factor that affects the thickness variation of coal seam on a mine field scale.
构造作用是控制井田范围内煤层厚度变化的主要地质因素。
6) variable thickness wall
变厚度墙
补充资料：板带厚度测量
板带厚度测量
thickness measurement of plate and strip
bondai houdu eeliang板带厚度测量(thiekness measurement ofpfate and strip)指板带厚度尺寸的在线实时测量。这是提高成品率，保证板带材产品质量的重要措施，是实现生产过程自动化不可缺少的重要环节。(见厚度自动挂制) 板带厚度的在线测量可分为接触式测量和非接触式测量两类。接触式测量按工作原理分为电感式、差动变压器式、角位移式、磁栅式等。非接触式测量按工作原理分为射线式、微波式、激光式、气动式、涡流式等。在生产过程中，选用哪种测量方式，取决于板带的材质和生产过程工艺所提出的技术要求。非接触式测量得到广泛采用。 中国在2。世纪50年代开始对测厚仪进行了研究，现在已有了各种类型的测厚仪，对轧制生产线的自动控制起了很大的促进作用。各种类型测厚方法的仪器、应用范围和产地如表所列。 各种测厚仪器的性能、特点和应用扭李 (李由婉)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条