1) Al Si insert alloy
Al-Si合金中间层
2) Al-Si-P master alloy
Al-Si-P中间合金
1.
In this study, a novel Al-Si-P master alloy has been successfully prepared to modify and refine primary Si in eutectic and hypereutectic Al-Si alloys.
研制了一种高效且适用性强的Al-Si合金变质剂——Al-Si-P中间合金。
3) Al-P-Si master alloys
Al-P-Si中间合金
1.
In this paper, the synthetical principle of Al-P-Si master alloys and their modification treatment technique have been investigated to achieve stable modification effect and avoid environmental pollutions in ingot metallurgy Al-Si piston alloys, using optical microscopy (OM) and electron probe micro-analyzer (EPMA), etc.
为解决Al-Si合金变质过程中环境污染和变质效果不稳定的问题,本文利用金相及电子探针微量分析仪(EPMA)等手段研究了Al-P-Si中间合金的合成原理及其对Al-Si活塞合金的变质处理技术。
4) Al-Si alloy
Al-Si合金
1.
Simulation of mold filling and solidification on gravity casting of Al-Si alloy(A357);
Al-Si合金(A357)重力铸造充型及凝固过程模拟
2.
Electromagnetic Separation of Magnetic Impurity Particles in Al-Si Alloy Melt;
Al-Si合金熔体中磁性杂质颗粒的电磁分离
3.
Effects of high magnetic fields on the distribution of Si in solidified structures of Al-Si alloy;
强磁场对Al-Si合金凝固组织中硅分布的影响
5) Al-Si alloy
Al-Si 合金
1.
Micro-arc oxidation coatings were prepared on Al-Si alloy surface using own made micro-arc oxidation device.
采用自制的微弧氧化装置,在 Al-Si 合金表面制备了微弧氧化涂层,在对涂层进行表征的基础上,进行了其往复滑动的摩擦磨损性能研究。
6) Al Si alloy
Al-Si合金
1.
Fe and Ni with high melting points can be melted directly into the surface of Al Si alloy by Argon arc.
利用氩弧将高熔点的铁、镍直接熔入 Al-Si合金表面 ,经重熔后获得组织均匀的表面合金化层 ,合金化层的深度约 5 mm。
2.
Mn is added into Al Si alloy containing Fe, then cast into sample and weld wire.
在含 Fe的 Al-Si合金中加入 Mn元素 ,铸成试样和焊丝 。
3.
The testing results showed that a significant modifying effect can be achieved in eutectic Al Si alloy in die casting by the addition of w(RE) being 0.
8%的稀土对共晶Al-Si合金具有良好的变质效果 ,而在 960～ 10 60℃下的过热处理能使 RE变质后的共晶 Al-Si合金中的 Si相进一步细化 ,从而获得良好的凝固组织。
补充资料：中间层
从平流层顶至约85千米高度的大气层。层内温度随高度的增加而迅速递减。大气虽极其稀薄，但有相当强烈的铅直对流。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条